Gareth Hughes Posted February 12, 2012 Share Posted February 12, 2012 (edited) Folks - up for sale is my Barge Concepts VB-jr blend pedal. Top quality from a great, sadly missed company. I used this to blend in some clean signal with an overdrive or to tighten up the low end of an envelope filter. I ordered it with the optional external phase switch - perfect for using with those pesky Electro Harmonix pedals. Also handy to flip it out of phase and use the blend to filter out boomy low-end. I added the big knob so that you can use your foot to adjust settings on the fly. Another bonus is that it has a high input impedance, so I had great results using my double bass piezo pickups and running it into octave pedals and envelope filters. Nice and nasty. Comes with both the original knob and the big one. Price is [s]£75[/s] [b]£70[/b] posted next day Special Delivery to UK. [attachment=99821:IMG_4130.jpg][attachment=99822:IMG_4131.jpg][attachment=99824:IMG_4128.jpg][attachment=99825:IMG_4129.jpg] Here's what Barge Concepts have to say about it: [b]The VB-jr is a fully buffered True Bypass loop with a variable Clean Blend. The VB-jr uses audio grade Burr Brown op-amps to buffer the send and receive signals, allowing improved signal strength over long pedal chains and cable runs, and minimizing “tone sucking” from vintage and mass-produced effects. The Clean Blend control mixes the clean/direct signal with the output of the effects loop. Just as the Barge Concepts VFB-2 has become a popular platform for custom modifications, its new compact counterpart was designed with the same versatility in mind. New custom options available for the VB-jr will include optically isolated expression control of the Clean Blend circuit, similar to that of the Barge Concepts VFB-x, and switchable phase inversion of the Send signal for compatibility with certain vintage effects. The watchword of the VFB series is unparalleled versatility. Whether you simply need a signal buffer or true bypass looper, want to add a blend control to your favorite stompbox, the VB-jr is a tool that has a place in every musician’s rig. With its fully buffered signal path, complete isolation of inputs and outputs, and an intuitive single knob control set, the VB-jr is in a class by itself in the occasionally confusing world of buffers and bypass devices. Application Suggestions: As a True Bypass loop: Use it to turn on/off multiple pedals at once, keep noisy or tone-sucking pedals out of your signal path, add true bypass to any or all of your pedals without complicated or overpriced modifications. As a Blend control: Mix your clean tone with that oscillating delay or your heavy fuzz and distortion sounds. Run a chorus or flanger in the loop of the VB-jr to add some swirl to your dirt sounds and modulate your delays. It’s perfect for Bass and Baritone players that want to use conventional guitar effects, but need to dial in some of their clean instrument signal for improved low end response. Also a perfect addition to digital delays and multi-fx units that may have a blend/mix function, but are mixing in a digital/processed version of your clean tone - not your actual direct signal. Use the expression control to change your blend settings on the fly - fade from clean to distorted with your favorite overdrive, wet to dry with your delays and modulation FX, or use a clean boost for violin-like volume swells - all without having to turn a knob or take your hands off the strings. As a Signal Buffer: The VB-jr uses very low noise, audio grade Burr-Brown internal buffers to insure transparent sound across the entire audible spectrum. With all signals buffered, you have a lower impedance signal driving the pedals both in the loop and after your VB-jr, as well as high impedance inputs to insure that a clear signal passes to the output. All internal signals are actively blended so that there is absolutely no unexpected interaction between your instrument and your effects. VB-jr Features: • Compact, aluminum enclosure. Footprint 4.7” x 2.5”. • 3PDT True Bypass switching. • Dual color LED indicator for Bypass/Active. • Low noise, audio grade Burr Brown op-amps. • Low noise, 1%, metal film resistors used throughout • High quality mica, film, and tantalum capacitors for unmatched signal fidelity. • Switchcraft jacks. • Alpha pots with set-screw knobs. • Clean interior layout with 4-layer silk-screened and solder-masked circuit boards. • All jacks mounted on the North end to save board space. • Industry standard 9V DC power jack (operation supported up to 18V with regulated power supply)[/b] Edited February 22, 2012 by Gareth Hughes Link to comment Share on other sites More sharing options...
Gareth Hughes Posted February 15, 2012 Author Share Posted February 15, 2012 Bumpage Link to comment Share on other sites More sharing options...
AnalogKid Posted August 16, 2012 Share Posted August 16, 2012 Are you really really sure it's withdrawn? This is exactly what I need! Link to comment Share on other sites More sharing options...
Gareth Hughes Posted August 16, 2012 Author Share Posted August 16, 2012 Sadly yes - every time I think of selling it I realise it's a criminally undervalued piece of gear. And Geoff Bryant of Barge Concepts is a seriously cool dude. I just like saying that. Link to comment Share on other sites More sharing options...
Recommended Posts