Jump to content
Why become a member? ×

Kyron

Member
  • Posts

    97
  • Joined

  • Last visited

Posts posted by Kyron

  1. [b]Hello BCers!! [/b]

    [u] [b]I'm looking to sell a couple of things:[/b][/u]

    Both items have been used and might show some tiny scratches, dings etc, but are in good working condition

    This is the last of my Stage set-up:

    - [color="#0000FF"]BOSS GT6-B[/color], Good Condition; couple of tiny marks in paint, very little use...

    Power Adapter is included in the sale
    User Manual

    - [color="#0000FF"]Road Ready Pedal Flight Case 32"[/color], V.G.C.; Some of Velcro Pads used and some of Velcro Tape used.

    I'm including all of the original support pads that the case came with; these are basically to lift your pedals from the base of the case for easier access... I think that there is about 8 or 9 of these overall
    I'm also be including some of the Velcro Tape, Both Types (the 'hooky' kind of stuff and the 'felty' stuff)
    I'll throw in the 10m 4-way 240VAC Power Adaptor shown too

    I would really like to sell these as a pair, but am willing to sell separately; the reason being that the GT6-B will be much better off shipped inside of a Flightcase!!

    [color="#FF0000"]Price is £200[/color] for the pair
    Postage should be around £20-£25

    I might consider Trades for MarkBass Pedals (+/- Cash etc.) or anything else you have to offer...


    [b]Note: The TU2 and 9V Power Adaptor are not included in the sale![/b]

  2. [quote name='cocco' post='1009670' date='Nov 2 2010, 03:16 PM']If it's any where near as good as a T-bass that is in no way a bad thing. Ask any owner! The only issue I see is that this is more expensive than a second hand trace and a little less traditional looking.[/quote]

    Well, as an owner of a T-bass, I'd agree :) Looks like this Lodestone could potentially bring the same quality and tone perhaps..?

  3. [quote name='Isaac' post='1002972' date='Oct 27 2010, 08:36 PM']When I went to go pick it up the 210 I tried the 15 and it was beautiful. Very nice on it's own and with 210s.
    BUMP!

    Isaac[/quote]
    Cheers for the Bump mate :)

  4. [quote name='JMT3781' post='992941' date='Oct 18 2010, 11:25 PM']this 15 was mine for a short time... nicest 15 i have ever heard[/quote]

    Hey! Cheers for the bump- It's certainly the nicest and Brightest 1x15" I've owned to date :) How is the new rig stacking up? Bergantino 4x10" cabs, right? :lol:

  5. [quote name='Conan' post='966092' date='Sep 23 2010, 09:03 PM']I would totally agree with the above!

    I've played in some very loud bands, and never had even a TE AH250 up to anywhere near approaching "full" power or output into 4 ohms... It's great to have a powerful amp for reasons of headroom and the ability to get volume out of cabs with low sensitivity, but in reality who actually needs such volume potential except in stupidly loud rehearsals?

    BTW, the 1x15 looks a lovely cab at a great price, but I really want 8 ohm cabs as I like to use two at once!

    Good luck with the sale though.[/quote]

    Ah, thank you for that re-assurance!! :lol: I agree with the linking of the two cabs though... Very rare that you find a solid state bass head that can handle a 2Ohm load to link two 4Ohm cabs in parallel.. :\ I always borrowed an All valve head to keep the impedance down to 2Ohms, but not affect the power distribution!! :)

  6. [quote name='Kev' post='965178' date='Sep 23 2010, 12:59 AM']Forgive my ignorance, but after years of using combos I'm only recently in the amp-cab world. Am I right to assume this would not be really suitable for my markbass as it delivers 500w at 4ohm?[/quote]
    Well, you're not completely wrong Kev :)
    You'll find that you're MarkBass will deliver 500w RMS (I'm assuming) at the top of it's output, i.e., with the master volume (and whatever else) turned to the maximum setting, but as you'll never be likely to do so, you'll probably never use that much of its power consistently at one given time- I wouldn't be sure on the exact figure (as I don't know how loud your likely to turn it up! :)), but I can imagine somewhere between 200w and 400w perhaps

    I've used the 1x15" at rehearsals with a Trace Elliot AH500-12 (500wrms) and have never had speaker distortion or overdrive at any time, but what I haven't ever had to do is turn the volume to the maximum.. It's a complicated game matching amps and cabs! but providing you match resistance, and keep the volume dial below maximum, I can't see any issue with mixing the Markbass and EBS?

    What does everyone else think? or am I completely wrong!? :lol:

×
×
  • Create New...