lidl e

That's my kind of pedal!

Ya, i just use a random 3 button switch.

Anyone having ossues logging i to the datàbaae through yhe effects editor? It doesnt seem to be working fir me. Tried in mulitple computers.

I can log in directly on the website, but not through the FIEditor

3 hours ago, moose23 said:

 

If you wanna swing by mine I can clean that mistake. Maybe get the rest in before ya do just in case. Main thing is your spotting the mistake when it happens and not after you've finished up the build.

You the man, moose! 

I might have to do just that! Gonna see if i can soet it. I did irder a solder sucker, but you mught see me in your doorstep!

I was kind of grtting the hang of it, then i put a resistor there un a cap slot

11 minutes ago, Geek99 said:

What does the tc 3 switch do apart from that TonePrint switching?

The third switch activates the mute. 

1 button toneprint a 2 button toneprint b 3 button mute

1 minute ago, Geek99 said:

Got it, thank you 

Does your amp have one or two toneprint slots?

The older ones inly have one, but the newer have two and you need a three button switch to go between them.

You pair it with the plethora and some pedals, but not the amps

When tou click that, you'll see this screen. See how it says "toneprints fir bass amps"

Click the effect and toullcsee beam to amp. 

Hold that up to the pickups while tour bass is plugged in

Make sure toure choosing that

9 minutes ago, Geek99 said:

Is the app paired with the bh250? 
 

can you show me the app screen where it says “connected device”? Mine is blank 

No. Nit paired at all.

Make sure youre selecting the amp not the pedal for the toneprint list 

Hold on one sec

8 minutes ago, PaulHornBass said:

Yep! I've not tapped into its full potential yet, but it looks good!

The  presets are all really tweakable so you can take away or add to them

7 hours ago, PaulHornBass said:

Picked one of these up and I am pleased with it. At first I was put off by the array of presets, and struggled to find something inspiring. Having spent a bit more time with it, I find both the Vintage Basic and Vintage Comp have an old school tone that responds to variation in attack in a way I like. The tuner and 'stage feel' are welcome bonuses, too.

Have you connected the app?

I have the bh250 and i beam toneprints through the pickups.  

My phone sends out a tone and i hold it up to my pickups 

19 minutes ago, MrDinsdale said:

I’d definitely welcome visitors on my pedalboard if there are any pedals out there who want a place to stay 🙌

D'oh!

I meant that reply for the admiral!

I agree. Thus isnt meant to augment a bigger board, this is the board

1 hour ago, MrDinsdale said:

That’s so cool!

 

I think I might give the quad series ago if I scale up again. I went for tres, it fits 2 rows but pretty tight and nearly always has overhang of pedals. Having the extra space for cables looks way more practical and tidy I think. 

Absolutely amazing. 

Do you accept visitors?

On 16/04/2024 at 10:46, lidl e said:

I took the plunge with my first kit.

 

Let's see if i can figure this out. 

 

It's a HPF/LPF clone kit from das musikding

 

 

 

 

Ok, so i finally got around to starting this.....

And i already messed up! 

(I put a resistor into a capacitor slot and clipped it!)

Not sure if catastrophic or not yet, but i did definitely learn some lessons already. 

I think i got the actual soldering bit down, but i think i should populate everything forst instead if going one at a time.

Is there an easy way to remove resistors once put on the board? How about removing solder from a hole that it got into?

Those are my two issues currently

Also, i assume you can overheat parts?

I might have to source a few new resistors!

Look at that lil' fella...

17 minutes ago, Al Krow said:

Nice! What does it sound like? 😀

People dont listen if i post clips!

Sounds like a feckin jet aeroplane flying 40 feet above while on acid...

On 30/04/2024 at 18:42, lidl e said:

 

Not sure this will last because i moved my favourite distortion to get the paraeq on, but I'm looking forward to trying it out. 

 

 

 

 

I also had an epiphany in rehearsal last night.

I always put the DMC micro in front, but it's a bit taller than allcthe other pedals so inevitably I'd switch channels or turn other pedals on or off while using it.

I decided last night i didnt really need the DMC, i could just use 6 onboard presets for shows

Then it hit me. Put the DMC at the top. It's tall enough with the pedal toppers i can use it without disturbing the other pedals. 

It also gives me much better access to C4 expression input and the dmc expression input so i can simlutaneoisly control both the plethora and the C4 with the source audio dual exp pedal

This setup is perfect! I cant forsee any major changes bar MAYBE a different distortion.

Love it!

Pulled out the recording board today to rewire the moose sunhammer in and give it some sunlight and a quick run-through. 

Such a killer board, but it is so heavy...

Not sure this will last because i moved my favourite distortion to get the paraeq on, but I'm looking forward to trying it out. 

I've been so gas free for months now that i dont even really look at pedals to buy anymore.  I really only wanted the paraeq deluxe, but i couldn't justify the price

A lightly used one appeared locally and i picked it up at a great price! I couldnt believe my luck!

I dont think ill use it for my gigboard. My thoughts were to use it strictly for recording,  but i have worked out a configuration where it might get added on. Will mess around with it and see.

Stoked on this one for sure!

That is unbelievable!

Wow...

Their best tune is Gimme Back My Bullets. Sick groove.