Captain Rumble

This was bought for a specific task which has long since gone and has sat in my little studio for a couple of years not being used and I now could do with the space. It is the 600watt 8 ohm version  and although it has seen some use it is in good condition and works exactly as it should, it is an easy lift even for me and will come with a Rocsolid cover that is also in good condition. You are welcome to come and try it out as I dont feel it is practical to post unless you wanted to organise your own courier at your own cost and risk. I am happy to talk about a possible meet somewhere convenient to all parties. Happy to answer any questions or supply more detailed photographs if required.

Cheers

John

I understand why you are doing these changes security etc. I guess what I don't know is what is a supporting member ?

I am about to order these screws from the USA as they are not available here, they are 8 - 32 unc undercut countersunk flathead screws 1/4 inch long. I will probably order a box full as delivery is about 3 times the cost of the screws they are also used on the M Pulse 600 so might be able to help you out if you lose any. Just a thought but have you tried placing the screwdriver in the screw and giving it a sharp tap followed by trying to tighten rather than loosening just a little you only want to feel it move very slightly then go for loosening. Also worth noting that I think these are Philips as opposed to posidrive and the correct driver needs to be used to give you the best chance.

will you be changing the accounts of people similar to myself who have been on here for 15 odd years but do not feel the need to comment unless they have something relevant to say, occasionally buys or sells something, attends bass bashes so that I/we can continue to access all parts of the forum ?

I would have that off you if I may. 

looks like I will have to order them from the USA as I am unable to locate any in the UK 🙄

thanks guys will order some now I think 😁

They are .260" long overall  and .160 diameter outer thread.

On 30/03/2024 at 23:13, agedhorse said:

Can you post a picture of which screws? There are 3 different sizes used on that chassis.

Does anybody have any of the small screws that fix the case to the chassis or does anybody know what they are so that I can buy some.

Cheers

John

Hi Nik, Hope your well, would you be heading southwards anytime in the near future ?

4 1/2 hour round trip no traffic issues, sun shinning, lovely coffee an absolute gent to deal with, bought his fantastic ACG Micro Krell.

Yes it really was a very nice day, just wish I could have hung around a bit longer and had another cup of coffee.

Thanks Bernard

just too far away 😞

I'll have one of the Levy's of you.

On 03/06/2023 at 12:22, Chimike said:

And I'm still hiding some !

Some ??

Thanks guys going for the one Knicknak suggested

bump

Does anyone have or know where I can get a hard case, padded bag or similar for a Moog sub phatty suitable to protect it while touring around europe.

John

bump

Seriously good cabs easy lift thanks to low weight and effective handles well placed so it balances when you carry it. Comes with original Vanderkley padded cover, cab and cover in good condition.

Model: 112MNT 

Configuration: 1×12” Neodymium driver + tweeter

Power: 600 Watts continuous power handling

Impedance: 8 Ohm 

Freq. response: 40 Hz – 16 kHz

Sensitivity: 99 dB 1W @ 1m

Dimensions: H x W x D, 42 x 51 x 41 cm

Weight: 16 Kg / 35 lbs

Bought Phils Mesa Boogie Subway 1x15, 400W, 8 ohm Ultra Lite Cab, a pleasure to deal with and cab exactly as described.

It was never going to hang around long was it

Awesome cabs I use same configuration and no longer gas after cabs 

Have had this problem with an instrument cable tried it with different instruments, amps ect with out it changing checked both jacks but unable to find any kind of fault so I just stopped using that cable. I guess the insulation must have been breaking down/faulty or some such thing I'm no expert on these things.

Drove up to Northampton to pick up Bernard's P430 and Stage clix good coffee pleasant chat amazing collection of Basses very nice guy to deal with.

Thanks