Ian Savage

Need to sell on a couple things first, but if this is still here at the weekend (and you'd be willing to talk about postage to Spain, maybe neck-off) colour me interested! 

Before I ask you to measure anything ( ) - would you consider postage to Spain (neck-off, natch, and at my risk and expense) if it doesn't prove super-expensive? I'm actually looking to convert my Vintage VJ (which I love the sound, look and 'hang' of) to fretless, so essentially would just be looking to swap necks...

I'm seriously tempted if you'd be willing to post out to Spain (in bits and at my own cost and risk, of course)...provided it's not sold by payday, skint until then!

The tappedy-tapping is pretty easily contained within the room, as a couple of people have already noted - to prevent it getting out I've had success with building a quasi-isolated 'drum riser' thing from layers of plywood, Rockwool and neoprene (cost about fifty quid and an afternoon's building, totally worth it in terms of not having to deal with shirty neighbours). Might be a little overkill for your needs, but if you're one of those who likes a bit of a DIY challenge i's actually quite good fun to do.

Very helpful, thanks Bill!

EDIT : one of these should do it, right? [url="http://www.duramat.co.uk/checker-plate.shtml"]http://www.duramat.co.uk/checker-plate.shtml[/url]

Slight thread derailment, but rather than start a new one - I'm getting some problems at high levels with my Laney Nexus bass head seemingly vibrating in sympathy with the matching 1x15" cab it sits on a producing a low-level crackling noise with the very lowest notes.

I'm aware that it's probably a dodgy joint on a circuit board somewhere but there's a LOT of board real estate in there; do you think that isolating head from cab as muc as is possible (Gramma pad, hockey pucks, rubber feet, whatever) might help? When I can afford to and don't need the head for a bit I'm planning to get it into Laney for a service, but as a stop-gap?

Ver', ver' tempting - giggable, do you reckon? I'm liking the idea of this and the matching 2x10 to replace my 'made of lead' 1x15" Trace....

I could be tempted if you're ever Birmingham-way (doubt I'd get this comfortably on the back of a motorbike :/ )

Sold pending!

Swift final bump...

Never sold in the end, this - just found it so BUMP!

In very good nick, used for a dozen or so gigs before I ended up downsizing; 'board Velcro pretty much perfect, and got quite a bit of pedal Velcro to go with it as most of mine had it on already. £30 ONO if you can collect from Birmingham-way, or a couple of quid for postage? Potential for trades, no idea what I want (except for a decent floor-based acoustic preamp) though...

Any excuse to plug one of my articles: [url="http://www.themidlandsrocks.com/the-pledge-of-allegiance-is-the-future-fan-funded/"]http://www.themidlandsrocks.com/the-pledge-of-allegiance-is-the-future-fan-funded/[/url]

Yeah, can be I s'pose; the pedal's actually at my (now) ex's though so it might be next week before I can lay hands on it!

Almost everything by AC/DC, ever.

Can't see piccies what colour is it?

'Last bump before eBay' bump, dirt-cheap compressor anyone?

Needs to go, make me an offer to save me the perils of eBay!

Call it Jehovah.

Monies never got sorted, still available!

Swift bimp...

Didn't BSA make a 'Big Valve' Super Rocket?

[quote name='bassace' timestamp='1412695064' post='2571086']
'at last week's gig we were asked to do something Irish - so in the interval we dug the carpark up.'
[/quote]
Actual LOL

Any need for trades at all? Got an MIJ Boss GEB7 and a Marshall Drivemaster sat here doing nothing if either were to take your fancy (might be moving on a Diago Commuter pedalboard as well once I find myself a Pedaltrain Nano)...

I'm assuming you're sorted, but on the offchance not - Diago Commuter with a couple of beers your way?