captainhaddock

Neck all glued up,
Fingerboard has gone to Haydn Williams for fret slots to be cut etc.
Should have some more pictures soon!

Just got some more pictures from Robbie,
Neck veneers cut ready for it all to be glued together tomorrow.

[attachment=115541:imag0427.jpg]

[attachment=115542:imag0426.jpg]

Custom Delano pickup has been ordered along with the Hipshot hardware.
More pictures soon!

Pre-amp arrived with Rob this very morning!!

[attachment=114896:imag0403.jpg]


After much discussion with Robbie I have decided to go with just Maple veneers in the neck

Cheers,beginning to feel the same way!
Definitely a case of less is more!!!!!!!!!!

Two more possible veneer combinations for neck laminates!!!!!!!!!!!

[attachment=114836:black~white.jpg]

[attachment=114837:white~black~white.jpg]


I would appreciate any sensible thoughts or comments on the three neck options!!!!!!!!!

[attachment=114721:imag0393.jpg]

Just received this picture from Robbie of neck mock up with the Maple veneers added!!!!

Cheers thanks,
Yes its a single core 8 ERB its going to be using the tuning of F# to F.

Hi All!!!!!!!!!
Just thought I would let you know about the Marseer 8 that is being built by Robbie at Rim Custom Basses,

Spec,
Black Limba body core with a Myrtle wood cap front and back,
35" scale 7piece Black Limba/Wenge neck with a Ziricote fretboard,

Audere "Z" mode 3 band pre with a Delano Custom quad coil Music Man pick-up!!!!!!!!
Hardware by Hipshot who else!

Just a few pictures in no particular order!

[attachment=114544:imag0387.jpg][attachment=114545:imag0388.jpg][attachment=114546:imag0390.jpg][attachment=114547:imag0391.jpg][attachment=114548:Marseer 8 body neck wood Limba.jpg][attachment=114549:Marseer 8 neck mock up.jpg][attachment=114550:Marseer 8 oiled Myrtle top.jpg][attachment=114551:Ziricote Board front.jpg][attachment=114552:Ziricote fretboard.jpg]

I own a pair of trb`s a 1004 and a 1006 and in my opinion they are some of he nicest basses I have ever owned!

[quote name='mart' post='1112919' date='Feb 2 2011, 07:55 PM'] Whoops! It's been a long day ....

Yes, of course, you're right, so my explanation wasn't as sensible as I'd have liked ...

But I still think my answer is right:
10mm centre-to-centre spacing would leave just 1mm from the centre of the B string to the edge and 1mm from the C to the edge, which is clearly not feasible (especially since the B string will be about 3mm wide). With 9mm spacing, that leaves just 3.5mm on each side, which sounds about right, or maybe a bit tight, which was why I reckoned it would be a shade under 9mm.[/quote]
yeah I see your point!
just measured the nut currently fitted to my bass and the 3.5mm each end of the nut seems about right!
Cheers thanks for you thoughts it gives me something else to think about

[quote name='mart' post='1112254' date='Feb 2 2011, 12:38 PM']Well, the individual centre-to-centre string distance will be slightly under 9mm, won't it? (That being 52 divided by 5 and rounded).[/quote]
Excuse my ignorance but isn`t 52 divided by 5, 10 point something or other?

HI
Could any of you 6 string Warwick owners out there help me?
I`m trying to find out the string to string and overall string spacing on a standard width(52mm) JAN111

Cheers!

Has anyone tried or used these pickups i`ve seen them on ebay for about 20 of your English pounds!
Any thoughts or opinions please!

HI Guys!
Was just wondering if it would be possible for me to change the string spacing on my TRB1006 from 17mm to 17.5mm or even 18mm as used on the Jap made TRB`s

[quote name='benzies123' post='698889' date='Jan 2 2010, 05:43 PM']What is the string spacing on the 201? I can't find it anywhere.

Thanks[/quote]
I fitted a Hipshot A series bridge on TRB1004 don`t think it made that much difference to the tone but it looks a lot better than the standard black chrome finish bridge that Yamaha use!

[quote name='pbaleiras' post='694547' date='Dec 27 2009, 09:47 PM']hi!!

I have a Yamaha TRB1005….and I want to buy one hardcase, because gigbag is very fragile to be able to walk with bass to the concerts...

I am from Lisbon, Portugal… and not meeting no store here where I can buy…. There in England, where I can buy one and order to come to Portugal?!

Help me!! Pleaseeeeeeeeeeeeee....

CheerS...
Pedro Baleiras[/quote]
Hi Yamaha used to sell a branded hardcase made by Hiscox cases that could be ordered through your Yamaha dealer
If thats any help!

[quote name='benzies123' post='693701' date='Dec 26 2009, 01:26 PM']It's pretty easy! The only massive difficulty with TRBs is the pickups which are slightly bigger then everyone elses...it's rather frustrating. But yeah if you look for a preamp that comes with 5 pots it's quite a good starting point (unless you don't mind drilling new holes or anything like that).

A few days ago I went ahead and bought myself the John East U-Retro 5 Knob Deluxe bass preamp, as the name implies this is a good fit and not to mention apparently sounding excellent.

If you want I will write again when I have installed the preamp.[/quote]
I have been looking at the East pre or the Audere 4band any chance of letting me know how you get on with changing the pre!
cheers

Has anyone ever fitted a aftermarket pre-amp in a Yamaha TRB series bass!
If so did you have any problems/what did you fit?
Any thoughts would be very helpful!

Cheers

cheers for the info been looking at the overwater strings they look like good value, the link for black dog music looks interesting i`ll check it out thanks!

Hi
looking for some new strings for my 6 anybody got any recomendations?

[quote name='wizbat' post='460486' date='Apr 12 2009, 12:04 PM']Try Wizard pickups in wales
[url="http://www.wizardpickups.co.uk/"]http://www.wizardpickups.co.uk/[/url][/quote]
Nice one,just looked at their website they look like what I`m after!

Hi!
I`m looking for pickups to fit a 6 string bass, my current pups are EMG 40 size and the bass has a string spacing of 79/80mm has anybody got any ideas or sugestions, Emg tell me that their 40P pup has a coil length of 79mm so i might get some drop off!

Cheers Ta

[quote name='funkypenguin' post='386263' date='Jan 20 2009, 03:38 PM']The Legend 6ers are lovely basses indeed. i was going to go for one in natural bubinga but problems with order time cropped up (sound control was in the process of going up the spout), so i chose my current main bass instead (Indie IB 606). as has already been mentioned, if you like the EMG sound, go for it. the older model with the 3 band EQ is more attractive if you can find one but buy any model in the confidence that they are a lovely instrument. Again, as has been said, make sure youve had a chance to feel the neck, specially in first position before you part with your cash.
Hope this helps!
Ben[/quote]
Cheers guys thanks for the info, all i`ve got to do now is wait untill march because they`re not available at the moment!

[quote name='jocke' post='383023' date='Jan 17 2009, 09:15 AM']Cool. Thanks!
I look forward to trying this out. Now if waiting for a new bass wasn´t this hard...[/quote]
no worries,silly question but how long have you been waitin for your marquee?
as i`ve been told they are hard to get at the moment,what colour are you getting?

[quote name='jocke' post='382318' date='Jan 16 2009, 01:07 PM']I have a Marquee on the way and cant find a wiring diagram or description of what the 5 way pickup switch does.
I can always find out when I get it by switching and tapping with a screwdriver on the pickups to see which ones are on and not. But something to guide me would be nice.[/quote]
Hope this is some help!
possition 1neck pickup
2neck&middle
3middle pickup
4middle&bridge
5bridge
When you pull up on the bridge tone control positions1&5 bridge pickups only,and 2,3or4 gives you all 3 pickups together,
also the front tone control works with any position not containing the bridge pickup and the rear tone control works positins containing the bridge pickup 4,5& pulled! in position 4 both tones work but the middle control is slightly dominant.