PinkMohawk

Hey mate, just sent you a message about the head

On 24/10/2018 at 23:19, dave_bass5 said:

Thanks for the info. Might not bother then.

I use that stuff, it's not too bad to deal with as long as you don't use too much of it. I also use a couple of flathead screwdrivers to help pry pedals off, makes it pretty quick.

I'm running the Hotone Cybery, I'm really liking it so far, it's dead quiet, and that's with me running a heavily distorted stereo rig too. Also allows for midi control, and you can edit your presets via a phone app.

I recently rebuilt my board, and I went with the Vitoos Iso 4 Plus, and it's been rock solid so far, loads of current on tap, 8 outputs, very small and low profile, and dirt cheap as well. I don't like the idea of rechargeable supplies, too easy to forget that you didn't charge it enough, or just not have enough power on tap to make it through a whole set, etc. 

14 hours ago, tommorichards said:

Okay, if you can find a set of caster wheels that are 3" diameter, and 1 1/2" across (the distance between the mounting points), then that would be grand. 

Or for the full unit, it's 

100mm overall height

45mm x 75mm fixing hole centres. 

I can't find any anywhere. 

I just drilled new holes when I replaced mine, not worth the hassle of searching really

I sacked off the original wheels when one of mine broke, replaced them with skateboard trucks and wheels instead,so much smoother and easier to work with now.

Don't suppose anyone has any leads on some right angle IEC plugs, preferably low profile? Google hasn't really helped, since I need a male and female, male going to the left, female to the right. Making some leads to connect my guitarists two PP2+ together to minimise how many cables are laying on the floor, and I want it to be small enough that he can get it in and out of the case without having to take it out every time, because that is a sure fire way for it to get left behind at a venue. 

Has anyone tried a Boss ODB3 at 18v? I've got one on my board, and my power supply has a spare 18v output, but I'm not sure if it'll blow it up or not, anyone got any insight? 

I do something similar, the splitter I use being in the middle of my chains, with separate drives after it on each channel, and it works just fine for me, not had a single issue with it.

Hey guys, I'm searching out a hard case for my Epiphone Ripper bass (one of the recent ones) and I'm having trouble finding anything. I've got a case that might fit, but would require modding and voiding the warranty. Gig bags won't do, my band tours a fair bit and they just don't offer enough protection or stack well in the back of the van.

Hey mate, are you open to trades?

Just get it all on a board man, easier that way. Plus, it doesn't limit you to only multi's that have a DI out.

Korg Pitchblack+ will do just that mate, my guitarist uses one to switch between wireless/cable in case of emergencies.

I make my own straps out of nylon/poly webbing usually, since I found enough to make a strap for my main when I was working. However, I've since gotten a spare, and my guitarist has asked if I can do him a couple, so I need to actually find some now.

What I'm asking is if anyone knows where I can 4 inch wide webbing? Black is ideal, but any supplier will do, since everywhere I've looked only supplies up to 2 inch wide webbing.

So I've got a pair of old Peavey Century 120 Bass Series heads, and I'm having a little trouble with them. I plugged them in at home, turned them on, they made noise, sounded good, etc. But earlier I took them to my practice space, plugged them in, and the moment I turned them on the circuit breakers tripped, killing the sockets in every room in the building. Now, I can't risk taking these heads out into the world and having them tripping circuit breakers at venues, so any help anyone can offer would be appreciated.

I feel like I should say, I am running the amps at home with a Belkin Surgemaster powerstrip, but I'm unsure whether or not that makes a difference. The guy who runs the practice space says that the more modern RCD's are much more sensitive, and will trip very easily, whereas older ones such as the ones in my house won't. This does seem to be the case, but like I said, I need to know if there's anything I can do to fix this issue.