DanD

I could ship it to you but you probably want to play it first.

Hi Mike, I've added a couple of examples, cheers.

TRB- 5P Groove 1.mp3 TRB-5P Groove 2.mp3 Up for sale is this fantastic example of the early made in Japan Yamaha TRB-5P with original hard case. The instrument sounds superb, plays wonderfully and is in excellent condition for its age. SPECS Figured Maple Body with Thru-neck Construction, the piezo pickups used on the TRB models use individual bi-morphous piezo elements for each string, all built into a specially designed bridge which is machined from solid brass. Because piezo pickups directly pick up the resonance of the instrument body, the body itself must be made from the finest woods and designed to deliver rich, deep tone. The neck-thru design of these basses affords the best possible foundation for this amazing sound. SERIAL NUMBER: 4Z08048 (1986-89) CONDITION: Excellent, light marks on the body lacquer, a small number of marks on the head stock and some minor damage to one corner of the hardcase. COLOR/FINISH: Turquoise/Gold WEIGHT: 10lb 5oz/4.5kg MATERIAL: NECK - Maple/Mahogany FINGERBOARD - Ebony BODY - Figured Maple/Rose/Maple NECK SIZE: Scale length - 33-7/8 (860mm) No. of Frets - 24 Construction - Neck-thru-Body 19mm string spacing at the bridge PARTS: Hardware - Gold Plated Bridge - BPZ5 (With Piezo) PICKUPS: Single Coil x2, Piezo pickup CONTROLS: Mixer Front P.U. & Rear P.U. Mixer Piezo P.U. & Magnetic P.U. Bass control Treble control Master Volume Piezo Low-Cut switch CASE: Original Hardshell Yamaha Case

Bump

Yep, still available.

Horsham, West sussex

Cab is in good condition, not looking to trade, collection only, £400 o.n.o Here's some official company info General info: All NeoLite speaker cabinets are made out of very strong but lightweight, void free birch and poplar plywood, dowelled joint construction and internal bracing. All woodworking is done with ultra precise cnc-machines. The NeoLite cabinets are loaded with the latest generation custom-made neodymium drivers. The drivers are absolute state-of-the-art; constructed from a cast aluminum frame, neodymium magnet assembly, unique coil and magnet cooling design, waterproof cone material, linear frequency response, high power- and sensitivity-ratings. Cabinets with a tweeter feature a custom-made filter with tweeter protection circuit and a high frequency attenuator on the back panel. Here you will also find two Neutrik® speakon/6.3mm jack-combo connectors linked parallel. All speaker cabinets are sealed airtight from the inside so the air will only enter or leave the cab thru the tuned port-tube mounted on either the front or back or both. All speaker cabinets are covered with black carpet, which will protect your cabinet for years to come. Every speaker cabinet is hand-made by Marc Vanderkley.[list] [*][b]Model:[/b] 112EXT [i]NeoLite[/i] [*][b]Configuration:[/b] 1x12” Neodymium driver + tweeter [*][b]Power:[/b] 300 Watts AES* [*]*2 Hours test according to AES 2-1984 Rev. 2003 [*][b]Impedance:[/b] 8 Ohms [*][b]Freq. response:[/b] 40 Hz – 16 kHz [*][b]Sensitivity:[/b] 100 dB 1W @ 1m [*][b]Dimensions:[/b] H x W x D, 41 cm x 50 cm x 41 cm [*][b]Weight:[/b] 15 Kg / 33 lbs [/list]

Bump

I will amend my address, cheers.

[color=#666666][font=verdana, arial, sans-serif][size=3]Top quality bass guitar cabinets in excellent condition. Pick up only, your welcome to come and try them out.[/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]£250 for the UL110 [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]£300 for the UL112 [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]£500 for both. [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]Below is some official Epifani info; [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]The Epifani UL-110 Bass Cabinet must be heard to be believed. The strong yet lightweight Italian poplar cabinet weighs just 22 pounds yet is robust enough to handle a low B string. The 10" cast aluminium frame speaker with neodymium tweeter is punchy and tight with smooth, deep bass that is ideal for all applications from studios to small venues. Developed for the working musician the UL-110 is a great travel companion and used in pairs, provides the ultimate in portability and power. [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]Specifications [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• 250W 10" cast aluminum frame speaker with neodymium driver [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• 100W RMS tweeter [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• Light strong Italian poplar cab [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• Precise tuning [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• 1/4" phono/Neutrik SpeakOn connectors [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• High-grade electronic components [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• Heavy-duty fabric covering [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• Corner protectors [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• Top handle [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• 1/4" phono/Neutrik SpeakOn connectors [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• High-grade electronic components [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• Heavy-duty fabric covering [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• Sensitivity: 99dB SPL @ 1w 1m [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• Frequency Response: 45Hz - 16kHz [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• Power Rating: 250W RMS (600W Peak) [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• 8 ohms [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• Suggested wattage: 100W - 500W [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• Dimensions: 17 "W x 13-3/4"H x 12-1/2"D [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• 22 lbs [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]The UL-112 from Epifani is designed as a lightweight portable speaker cab that can deliver full range sound at reasonable listening levels yet still showcase the player's character and nuance without added colouration. Used by professional musicians such as Matthew Garrison, Lincoln Goines, and Ruben Rodriguez, this cabinet also inspired Anthony Jackson to co-design a custom version of the UL-112 for his personal use. [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]Specifications [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• 12" cast aluminum frame speaker [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• 100W RMS tweeter [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• Italian poplar cab [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• Precise tuning [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• 1/4" phono/Neutrik SpeakOn connectors [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• High-grade electronic components [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• Heavy-duty fabric covering [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• Corner protectors [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• Top handle [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• Killer in pairs [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• Sensitivity: 100dB SPL @ 1w 1m [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• Frequency Response: 43Hz - 16kHz [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• Power Rating: 300W RMS (1200W Peak) [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• 8 ohms [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• Suggested Wattage: 200W - 600W [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• Dimensions: 19-1/2"W x 16-1/2"H x 16-1/4"D [/size][/font][/color] [color=#666666][font=verdana, arial, sans-serif][size=3]• Weight: 30 lbs.[/size][/font][/color]

£1000 o.n.o This Andreas Zeller 3/4 double bass was bought from Malcom Healey in 2008 and is an excellent choice as a first decent double bass. The bass produces a very full sound for an instrument of this price and is easy to play due to an excellent set up. It is strung with a new set of innovation Honeys and the neck has had the lacquer removed for ease of playing. Both the factory bridge and end pin have been replaced with higher quality parts. Pick up only, you are welcome to come and try it out. Here's some official info on the bass; 'Andreas Zeller' double basses are made in Romania to Stentor specifications. They represent outstanding value. All instruments feature carved solid spruce table, maple back, sides and neck, amber gold varnish, ebony fingerboard and tailpiece and full plate machines. 3/4 size Solid maple back and sides Speaking length: 41"(1041mm) Length of back: 42½"(1080mm) Overall length: 71½"(1816mm) (excluding endpin length)