disssa

A mix between Vong by schalltechnik 04 and Broughton Hi/Lo PassFilter:

12 hours ago, JPJ said:

Funnily enough, this just came up on an SWR lovers Facebook group earlier today - why someone hasn’t done this with the SWR Grand Prix preamp. I know I’d buy one if somebody did 😎

I can't find any schematics for the Grand Prix...

No new invention, but again just a copy: Trace Elliot V-Type Preamp as a pedal

23 hours ago, Passinwind said:

Making non commercial pedal clones for yourself shouldn't really matter a whit to anyone IMO. There's a huge DIY clone building culture these days, think a few heads would explode over this for instance: https://www.pedalpcb.com/product/pcb553/  ? 😉

I traced a lot of Broughton Pedals. I noticed that well-known circuits have been modified a little bit. Not more. I traced also a lot of other pedals. Most pedals are based on well-known circuits. I build the pedals for myself. I also don't publish schematics from traced pedals. At most from pedals that are only a 1:1 copy themselves.

Original and Copy:

16 hours ago, Bassybert said:

Another cracking build Disssa! Are those valves/tubes running on high DC voltage?

Yes, 200volt

Peavey TB RAXX clone 

My version of the schalltechnik_04 Pumpernickel:

Done...

8 hours ago, Bigwan said:

You really do work extremely fast @disssa! WANT ONE!!! 

 

125B or 1590BB?

Yes, it is  a 125B-Pedal 

On 07/10/2022 at 18:26, LukeFRC said:

What are you aiming to do? clone it in a smaller case? 

First Prototype:

It sounds really close to the original pedal.

Traynor YBA 100/300 Preamp clone:

On 07/10/2022 at 18:26, LukeFRC said:

What are you aiming to do? clone it in a smaller case? 

I will try it…

5 hours ago, Rich said:

I'd like to Ask The Audience something. 

 

I built version A:

15 hours ago, Bassybert said:

I really like your work Disssa, it always looks so well laid out and very well put together, but on the flip side (and not trying to be a party pooper) should you really be using Trace Elliot, Orange etc logos on your pedals? I'm pretty sure they're trademarked.

I've asked myself about. My answer is roughly as ITU wrote it. Mostly I build only for myself. I do not use official logos on pedals that I sell.

Trace Elliot SMC GP7 Preamp:

JPTR FX Jive Clone:

Greer Amps Soma 63 Clone:

27 minutes ago, Bigwan said:

I'd love to do one of those. Do you have a schematic for your PSU? 

https://www.ledsales.com.au/kits/nixie_supply.pdf

Ampeg B-15N Preamp built according to original schematics (except power supply...)

Peavey F-800 B Preamp:

I used the factory schematics to create a pcb

Peavey F-800 B Preamp:

The JPTR Jive has nothing in common with the Akai. It is only for marketing. Half of the pedals sold are junk, the other half sound awful.

On 14/01/2022 at 10:29, bloke_zero said:

What are the jack sockets? They look like an improvment on the old style switchcraft ones I'm using in terms of space. Are you finding them reliable?

 

That are Lumberg jacks. Usually I used jacks from Switchcraft. But the Lumbergs are much smaller. So far I've only had good experiences with the Lumbergs.

Search the internet...