ianwild16 Posted December 28, 2009 Share Posted December 28, 2009 Hi Does any one know where I can get a length (approx 30 cm - the length of a ruler) of metal or black plastic bent at 90 degrees down the length to protect the edge of my cabinet? Its to go on an Ampeg 410HLF. When I slide the cab into the back of estate car, the top 'width' edge scrapes along the floor of the boot. Its took off the vinyl covering and now its started to take off the pieces of gaffa tape I've put on. It does already have the chrome corner protectors, but these are only thin, so the cab doesn't slide on these. I've had a look on Maplin and B&Q sites but can only find the corner protectors. Thanks! Ian Quote Link to comment Share on other sites More sharing options...
jmsjabb Posted December 28, 2009 Share Posted December 28, 2009 Most larger B&Q and Homebase have these lengths of preformed shape inc right angle. They are usually in a big rack with steel, aloy and plastic sections Quote Link to comment Share on other sites More sharing options...
neilb Posted December 28, 2009 Share Posted December 28, 2009 maplin used to do this IIRC. Quote Link to comment Share on other sites More sharing options...
garry Posted January 3, 2010 Share Posted January 3, 2010 hey not sure if you are already sorted, but here's a link to the Maplin edge protection, comes in a pack with the matching cormers, but its pretty cheap.... [url="http://www.maplin.co.uk/Module.aspx?ModuleNo=33235"]http://www.maplin.co.uk/Module.aspx?ModuleNo=33235[/url] Quote Link to comment Share on other sites More sharing options...
.gif.9ad672bb8b84505709f76b39c8c256ec.gif)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.