john_the_bass Posted September 11, 2007 Share Posted September 11, 2007 (edited) part two of today's stupid questions the pickguard on my squier P has gone a bit lumpy - basically it's warped i think, while on the bass and it now doesn't sit flush with the body. Can I sort this out or is it really new pickguard time? Ta Edited September 14, 2007 by john_the_bass Quote Link to comment Share on other sites More sharing options...
neilb Posted September 11, 2007 Share Posted September 11, 2007 (edited) Try soaking it (the plate, NOT the bass!!!) in a bowl of very warm water and placing it between two large heavy books. If your partner/missus is anything like mine, you will find she has a Next or River Island catalogue floating around somewhere. Leave overnight. Sprinkle with olive oil and juniper berry oil and re fit plate. Voila. (Ignore the last bit about the oils-that was theatrical license). Edited September 11, 2007 by neilb Quote Link to comment Share on other sites More sharing options...
john_the_bass Posted September 11, 2007 Author Share Posted September 11, 2007 ah ok cheers neil yes we have lots of next books in our house. my work shirts magically appear from their pages Quote Link to comment Share on other sites More sharing options...
john_the_bass Posted September 12, 2007 Author Share Posted September 12, 2007 Question - is it a good idea to seal this up inside a big sandwich bag or something, before immersing it in hot water and also using some kind of weight to flatten it down in the bowl (the latter probably not a good idea, but i thought i'd ask anyway)? It's an old pickguard - it's on my JV Precision and I've no idea whether it's made out of plastic or what - I don't think I've ever seen one that I could definitely identify as celluloid so I don't know what one looks like or indeed when they stopped using celluloid. Would any 13 hole pickguard fit? If I am going to have to replace it, I'd like another tort effect one - it's a shame to lose an original part, but if it's necessary, I will. I could try taking the pickguard on my modern USA precision, but to be honest - I'm not very good at this sort of thing and don't really want the hassle! Quote Link to comment Share on other sites More sharing options...
john_the_bass Posted September 14, 2007 Author Share Posted September 14, 2007 see above really - i soaked the pickguard, stuck it in between two next books and a yellow pages and stood on it for 10 minutes. it's still knackered. anyway, does anybody recommend any parts suppliers that sell replacement pickguards i can put onto my JV precision as a straight swap? I saw one on the WD site which is suitable for american vintage basses and is 13 holes, plus hole drilled for the thumbrest, but it's 45 quid. I've looked around and the ones for about 20 quid don't seem to be exact matches or say stuff like - some work may need to be done and some holes redrilled - i don't want to start drilling holes in an otherwise excellent condition JV bass and would prefer to know if something's a good fit before i fork out 45 quid on something i might not get a refund on. if you know what i mean somebody told me i need to get the plastic up to about 80-90 degrees C before I try and flatten it, could i put it in a 90 degree oven for a bit and then press it flat or do i run the risk of buggering it completely. ta Quote Link to comment Share on other sites More sharing options...
neilb Posted September 14, 2007 Share Posted September 14, 2007 (edited) I reckon it would melt at that temp mate. Sorry you had no luck with the hot water trick, worked with me. You may as well bite the bullet and get a custom plate cut. Speak to Mike at SIMS. If you send him the bent old plate, he will cut you a replica in whatever colour u like. [url="http://www.simscustom.com/html/scratchplate_files/scratchplates.html"]http://www.simscustom.com/html/scratchplat...atchplates.html[/url] Edited September 14, 2007 by neilb Quote Link to comment Share on other sites More sharing options...
john_the_bass Posted September 14, 2007 Author Share Posted September 14, 2007 cheers Neil Did you put much pressure on it for any length of time and did it work first time? I'm assuming it's plastic. I don't know exactly how old it is - the neck date is 04/83 but it's a solid colour bass which is 05/83 on (I think), I would have imagined it to be plastic anyway. Quote Link to comment Share on other sites More sharing options...
neilb Posted September 14, 2007 Share Posted September 14, 2007 I kept it pressed for a couple of days to be honest. It was a cheapo plastic jobby from JHS if I recall. Perhaps your plate is made of something different if its a oldy. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.