TecAmp M212-4 cab + Roqsolid cover, 600 watts, 4 ohms. Loud, Low, Clear, Light! £340 Chichester

[SumOne]

TecAmp M212-4 cab with Roqsolid cover. 

 

£340

 

• 600 Watts (RMS)
• 4 ohm
• 2x 12" drivers & 1" NTWN horn
• Tweeter switching system (6-position system that changes the crossover frequency to voice the cabinet clean/modern or vintage)
• Freq. Response: 36 Hz -19 kHz
• Sensitivity: 101 dB
• Weight: approx. 20kg (48lb)
• Dimensions (W x H x D): 54 x 75 x 41 cm (21” x 29,5” x 16”)
• Connections: Two Speakon jacks
• Fitted Roqsolid cover (worth £100)

 

Good condition and perfect working order, the Roqsolid cover has some scuffs (but that's its job!) and some small cosmetic marks on the cab. 

 

This can go very loud & low & clear with no breakup (I use it with an Ashdown RM 500 and play in an 8 piece Reggae/Ska band and have never needed to go above about 40% volume on the amp before I'm drowning out the rest of the band). It can sound clear/transparent, or can change the tweeter frequency for a more vintage tone. It is a tough and high quality bit of loud and good sounding kit in a reasonably lightweight and compact package. 

 

Pickup in Chichester, or can meet half way within a reasonable distance. Sending via courier is a possibility but I guess size/weight might make it costly. 

 

 

 

Edited Friday at 18:04 by SumOne

[BassAdder60]

I would be interested if you could ship to Suffolk 

[SumOne]

8 hours ago, BassAdder60 said:

I would be interested if you could ship to Suffolk 

 

That's good with me, I'll send you a message.