Jump to content
Why become a member? ×

Source Audio Aftershock - Bass distortion/fuzz/overdrive
£100
Edinburgh


Recommended Posts

Posted (edited)

 

This stereo pedal has three distortion types, can save up to 3 presets as it is without any additional gear. It can, of course, be used with the Neuro hub etc and MIDI for maximum control and maaaany more presets, but I never really explored that, the pedal does all I wanted as it stands. The Neuro app, however, is very handy, as it gives you access to many parameters. The way I used it was to create the basic overdrive/fuzz sounds using the app, and then just rely on the unit's physical controls to adjust drive, blend etc to taste. It's essentially 3 dirt pedals in one, and you can modify each until you are bored :D. It can run two of the distortion engines simultaneously, and blend them, stack them, or output them in stereo.

 

It can do too many things to mention, so if you're not familiar with the Aftershock it's probably best to have a look at this:

 

https://www.sourceaudio.net/aftershock-bass-distortion.html

 

and this (the demo focus a bit too much on the higher gain sounds, but it's excellend at low gain sounds too):

 

 

IMG_20250617_120128.jpg?rlkey=97b080vx49

 

IMG_20250617_120156.jpg?rlkey=9fmam42g0s

 

IMG_20250617_120148.jpg?rlkey=teuuk7u532

 

 

It has heavy duty 3MM velcro on the bottom, which of course can be removed. The original rubber feet were never installed and are included, as well as the cable to connect it to your phone to use the Neuro app, which gives you access to a huge array of parameters.

 

Edited by mcnach
  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...