Wayne Jones Bass 1000w Powered 2x10 Cabinet £425 Pocklington near York

[johnbiffa]

I own 2 1x10 Wayne Jones cabs and a Wayne Jones preamp which is my go to rig and I bought this incredible 1000 watt powered 2x10 on this forum last year as a viable “bigger venue “ alternative.

 

It is in perfect working order and very good cosmetic condition. A few very minor marks/dints which can be seen in the photos. I believe there are 3 variants of the cab, this one being the second, so same size and power as the later version, 

Available to view/trial near York or could potentially meet to complete the sale within a radius of about 59 miles. Not viable to post.

 

Here's details from the site: 

 

WJ 2×10 1000 WATT POWERED BASS CABINET

  WAYNE JONES AUDIO 

“The Wayne Jones Cabs Are As Good As It Gets” (2018 Review)
“The Best Powered Cabs I’ve Heard”
Two Editor Awards from Bass Player Magazine
~ Bass Player Magazine
 

DIGITAL DSP FOR POWERED BASS CABINETS

Now you can have a 1000 Watt Compact, Portable  High End, High Powered, Crystal Clear, Full Range 2×10 Bass Cabinet (40 Hz – 20 KHz) that only requires a pre-amp, your bass & yourself.

I still use the same 10” driver design that was in my previous model (if it aint broke don’t fix it) with air dried Kevlar Impregnated cones, a 70mm voice coil, massive ferrite magnets (in preference to Neo).

A state of the art switch mode D Class power amp with amazing dynamics, 20Hz to 20KHz frequency range (see specs) is built into the rear panel of the cabinet with a grill to protect it. I could have used what most other companies are using but this power amp far surpasses them with specs & amp quality.

Perfect for my cabinets as they need the power to move those drivers to give you all those frequencies. As opposed to other cab companies where their speakers do not deliver all the frequencies as present & as balanced as mine.

Dimensions

Height: 64.5cm   Width: 40.5cm   Depth: 51.5cm (25.4 x 15.95 x 20.28 In)

Weight 29kg, 65lbs

Cabinet Specs

Power Amp – State of the art D Class switch mode power amp 1000 Watts with heat sink plate mounted into the rear of the cabinet.

Internally the power amp mains cable has a heavy duty ferrite on it to shield from RF interference.

Drivers – 2 custom made Wayne Jones 10” drivers with Aluminium cast frames, Kevlar impregnated cones with specially formulated Eucalyptus pulp

Voice coil – 70mm

Magnet – Massive Ferrite.
Individual driver specs. 40 Hz to 4.5 KHz

Tweeter –  JBL, 1.75” Voice coil

Crossover point 3.5Khz

Control plate-  Brushed Stainless Steel

Mains in Power – IEC

XLR balanced Input

LED readout for thermal & amp; clip Indication

 

”Bigger venues” are few and far between and my 2 cab solution has always been ideal so time for someone else to explore these fantastic cabs. SBL have a great review on one of their give away videos and they are used by top session players the world over.