Dosi Y'Anarchy Posted June 18, 2017 Share Posted June 18, 2017 (edited) SOLD Awesome 2 Channel preamp/overdrive/distortion. The cab sim is great too. You can also blend the second channel (which is higher gain) with the first if you want. I've got a Darkglass alpha omega which cost almost 3 times this so I've gotta make some money back! AMT BC-1 “Bass Crunch” – 2-channel JFET bass guitar preamp Features overview The preamp has been built on the basis of the custom technology by АМТ using JFET emulation of the vacuum tube range clipping. The wide adjustment range in combination with rich functional possibilities that can only be found in a stomp box have considerably increased the preamp versatility. «Bass crunch» BC-1 preamp is based on a two-channel circuit. CLEAN channel shapes the classic bass guitar sound characteristic for «old» amplifiers and allows both velvet transparent sound and slight compressed overdrive depending on the position of Gain control. DRIVE channel contains a number of over amplification stages and is intended for obtaining the modern sound from clean to totally overdriven one. The High Mode provides additional possibilities in terms of the range enrichment towards higher sound density and aggressiveness. The adjustable 3-position mid-range filter combined with deep adjustments along the frequency ranges offer a musician its rich possibilities related to shaping of the overdriven tone range. Controls Clean Level – output signal level adjustment High – high frequencies adjustment Mid – middle frequencies adjustment Low – low frequencies adjustment Gain – channel sensitivity adjustment Drive Level – output signal level adjustment High – high frequencies adjustment Mid – middle frequencies adjustment by means of rejecter filter Freq. notch Freq. notch – cutout frequencies switch (rejecter filter) 500Hz, 330Hz, 230Hz. Low – low frequencies adjustment Pre. Notch – rejecter filter switch before Drive stage. 700Hz, 400Hz. Gain – channel sensitivity adjustment Overall Controls Blend – signal level balance adjustment between channels Clean and Drive Master volume – BC-1’s overall output level adjustment. Footswitch DRIVE – Drive channel on/off Led – Drive channel on indicator Footswitch HI/LO – Drive channel increased sensitivity on/off. Led – HI/LO mode with Drive channel increased sensitivity on indicator. Connections Right Panel INPUT – instrument input of the preamp SEND FX – signal send to aux effect RETURN FX – aux effect signal return Left Panel OUTPUT – direct output to power amp. CTRL OUT – AMT TS-2MIDI aux convertors control output CAB.SIM. – direct output to mixer’s line input. DI OUT – balanced output intended for connection of devices equipped with balanced inputs. Power DC 18V – for connection of power adapter Battery compartment – for two 9V batteries installation. £120 INC UK POSTAGE, PAYMENT VIA PAYPAL PLEASE Edited August 28, 2017 by Dosi Y'Anarchy Link to comment Share on other sites More sharing options...
Dosi Y'Anarchy Posted July 10, 2017 Author Share Posted July 10, 2017 Bump Link to comment Share on other sites More sharing options...
Dosi Y'Anarchy Posted July 27, 2017 Author Share Posted July 27, 2017 Bump Link to comment Share on other sites More sharing options...
Recommended Posts