Lifer Posted October 10, 2008 Share Posted October 10, 2008 Got a mighty mite fretless P neck on the way to go on my musicman copy. According to the measurements the heel dimensions are the same so should be a snug fit, but does anyone know what the string spacing on a P Bass and Musicman are? Will I have to get a P bass bridge? I'm well prepared for some work; the body's getting a stip down and respray, new electrics and some new hardware so no problem with moving stuff around to get scale length etc right, it's just the little niggly bits I'm not sure of. Anyone think of anything I've missed that could be important? Thanks! Quote Link to comment Share on other sites More sharing options...
BOD2 Posted October 10, 2008 Share Posted October 10, 2008 Never tried this but I shouldn't think there'll be problem. If you think about it the strings follow a line dictated by the nut at one end and the bridge at the other. The nut will fir the neck so there can be nio problems up that end. The only possible problem could be if the strings were too near the edges of the neck at the body end or (less of a problem)too far in from the edges at the body end. Given that playability dictates string spacing on any bass must be within a reasonable range it's unlikely you'll have any problems. I would just wait until the neck arrives than check it out. Quote Link to comment Share on other sites More sharing options...
rjb Posted October 10, 2008 Share Posted October 10, 2008 (edited) You could get hold of a fancy bridge that allows you to adjust the string spacing to your taste. Hipshot do a nice one:- [url="http://www.guitarpartsresource.com/bridge_hipshota4.htm"]http://www.guitarpartsresource.com/bridge_hipshota4.htm[/url] Edited October 10, 2008 by rjb Quote Link to comment Share on other sites More sharing options...
Lifer Posted October 10, 2008 Author Share Posted October 10, 2008 [quote name='rjb' post='303660' date='Oct 10 2008, 10:37 AM']You could get hold of a fancy bridge that allows you to adjust the string spacing to your taste. Hipshot do a nice one:- [url="http://www.guitarpartsresource.com/bridge_hipshota4.htm"]http://www.guitarpartsresource.com/bridge_hipshota4.htm[/url][/quote] Thanks for the replies guys! I've stripped it back but am waiting until the neck's arrived and I've sorted all the issues out before I paint it. Quote Link to comment Share on other sites More sharing options...
thepurpleblob Posted October 10, 2008 Share Posted October 10, 2008 Do the scale lengths match? It won't have to be much different for it not to internate. Quote Link to comment Share on other sites More sharing options...
Lifer Posted October 10, 2008 Author Share Posted October 10, 2008 [quote name='thepurpleblob' post='303806' date='Oct 10 2008, 01:22 PM']Do the scale lengths match? It won't have to be much different for it not to internate.[/quote] I'm quite confident I'm swapping a 34" for a 34" so should be no problem, but can move the bridge to compensate if it is different. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.