Tomsbury Posted July 27, 2016 Share Posted July 27, 2016 This is a really nice viby fretless. The Elite is actually an active bass with the TBX Circuit which is controlled by a double pot on the tone control. In the central notched position you have standard p-bass tone on full then from there you can roll of the highs or boost the mids and highs which gives you more tonal colour than an average P. It's in great condition with the only unoriginal features being the knobs (should be rubber sided with Fender 'F' on top) and the fact it has been de-fretted. It has been set up very recently and is in excellent playing condition. The fine tuning bridge works wonderfully and is actually really useful with it being fretless. It also comes with its original Fender hard case. There is a small amount of wear on the back of the bass but nothing more than expected on a bass of this age. I do have it listed on other sites for a bit more money but this is Basschat (have seen some listed for up to £1000) Postage can be arranged with UPS or other courier services (I prefer UPS) Link to comment Share on other sites More sharing options...
Tomsbury Posted August 11, 2016 Author Share Posted August 11, 2016 Bump Link to comment Share on other sites More sharing options...
Grangur Posted August 11, 2016 Share Posted August 11, 2016 Hey Tom, Welcome to BC. This is a nice looking bass. I'm no expert on Fenders, is this USA built? I'm not looking to buy, but if I was I'd like a good look at the fingerboard. As it's not a factory made fretless, this would be of concern to me. I hope this helps you sell and Good Luck With the Sale. Cheers Rich Link to comment Share on other sites More sharing options...
Tomsbury Posted August 11, 2016 Author Share Posted August 11, 2016 (edited) Hi there, It is USA built and and the neck is in great shape. I'll post a picture below. Edited August 11, 2016 by Tomsbury Link to comment Share on other sites More sharing options...
Grangur Posted August 11, 2016 Share Posted August 11, 2016 [quote name='Tomsbury' timestamp='1470931480' post='3109453'] Hi there, It is USA built and and the neck is in great shape. I'll post a picture below. [/quote] Post the new picture in the OP. Folk don't always scroll down. Good luck Link to comment Share on other sites More sharing options...
Tomsbury Posted August 11, 2016 Author Share Posted August 11, 2016 Whoever did the de-fret did a great job. There aren't any lumps or bumps, everything is straight and true. It actually has a micro tilt system so you can get the neck set just right. Link to comment Share on other sites More sharing options...
Tomsbury Posted August 11, 2016 Author Share Posted August 11, 2016 Clean job Link to comment Share on other sites More sharing options...
Recommended Posts