Jump to content
Why become a member? ×

Vintage Phase 100 Volume Problem...


livingbasshead
 Share

Recommended Posts

I recently bought an old phase 100 and I have a problem that when I switch it on it sucks some gain out of my signal so the effected tone is lower output than the clean tone. Has anyone experienced this or know a way of tweaking it to address this problem? Its been modified with a flick switch at some time in the past but I don't imagine that would affect the resistance.

Happy to post pics etc if anyone can suggest anything, thanks!

Link to comment
Share on other sites

I have not used a Phase 100; but I have used other one or two knob simple phasers and I have almost always found a problem getting them to sit well in the mix, due to either gain suck or gain addition. Personally I think all phasers and in fact many modulation effects need a gain control on the outside (some have micro gain pots internally). One alternative might be to get a Clean Boost/Cut pedal to put in front or after it.

Link to comment
Share on other sites

Thanks for replying. I have a newer phase 90 and don't have a problem with gain suck - but i thought i'd try a phase 100 as i wanted a bit more control over the intensity.
At the weekend I replaced the switch back to a stomp switch, and changed one of the jack inputs (which was a bit dodgy) but still have the problem.
I have a workaround that I can use my a patch on my BDDI deluxe with a higher gain, but I'd like to customise the MXR to increase the gain somehow - any suggestions welcome

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...