hamfist Posted June 11, 2014 Share Posted June 11, 2014 (edited) SORRY WITHDRAWN. Put a new, slimmer neck on it and changed the pickups to a Wilkinson/Tonerider PJ pair and I am much more drawn to it. I've got 3 x PJ equipped basses now and I think that's too many. This freshly put together bitsa has the widest nut (and is therefore the least appealing for me) and is thus now available. - Brand new ash body, finised in oil and wax. - Overwater (by Tanglewood) maple neck. Rosewood board. Bit wider than a Jazz neck. 40mm nut. With the excellent Overwater tuners. Looks like someone has fitted a D-tuner at some point, as there are two small holes on the back of the headstock by the E tuner. I'll get a pic of it later. - J-retro preamp - USA Bartolini PJ pickups - Badass II bridge White pearloid scratchplate. This bass plays a treat and gives such woody, resonant tones. Very complex mids, but also a very tight and solid bottom end. Very versatile sonically, with the J-retro. I can't imagine anyone being disappointed with the tones of this bass. Apart from the aforementioned small holes by the E-tuner on the rear, and a couple of minor marks this bass really is in superb condition. Now restrung with a brand new set of Rotosound Stainless roundwounds, which suit this bass perfectly IMO. Will come with a very protective Hard shell case. Posted within mainland UK for £299. Little bit less for collection (near Southampton). Poss interested in 4 string bass trades. Must have nut width <40mm. Particularly interested in Warwick Corvette/fortress or Yam TRB4, or .... what have you got ? I will get a pic of the headstock rear in a day or two but until then here's the one's I already have .... [url="http://www.ephotobay.com/share/overwater-main.html"][/url] [url="http://www.ephotobay.com/share/overwater-body-front.html"][/url] [url="http://www.ephotobay.com/share/overwater-rear.html"][/url] Edited June 14, 2014 by hamfist Link to comment Share on other sites More sharing options...
hamfist Posted June 13, 2014 Author Share Posted June 13, 2014 up Link to comment Share on other sites More sharing options...
Recommended Posts