matt-bass-sparkes Posted March 25, 2014 Posted March 25, 2014 (edited) [url="http://s1221.photobucket.com/user/matt-bass-sparkes/media/body/20140325_141454.jpg.html"][/url] [url="http://s1221.photobucket.com/user/matt-bass-sparkes/media/body/20140325_142035.jpg.html"][/url] [url="http://s1221.photobucket.com/user/matt-bass-sparkes/media/body/20140325_141537.jpg.html"][/url] [url="http://s1221.photobucket.com/user/matt-bass-sparkes/media/body/20140325_141531.jpg.html"][/url] [url="http://s1221.photobucket.com/user/matt-bass-sparkes/media/body/20140325_141518.jpg.html"][/url] [url="http://s1221.photobucket.com/user/matt-bass-sparkes/media/body/20140325_141512.jpg.html"][/url] [url="http://s1221.photobucket.com/user/matt-bass-sparkes/media/body/20140325_141504.jpg.html"][/url] I have the above for sale. This body is a from a 1993 Japenese Fender P-bass "P-43" and the serial number on the original neck was Q055752. The body is not in the best condition to be honest... There was a pickup that was put in near the bridge, and the routing for the pickup was not done that well. It was for a Seymour Duncan SMB-4 pickup, so the hole is quite big. I tried filling it in with filler, but failed miserably when it all crumbled out! So I have taken all the filler back out. Other things include a hole for a side-mounted jack intput was made, and a small bit of wood was removed from the hole where the volume pots are. There is moderate scratches over the body, and the back has some pretty severe buckle-rash.. I would think that this is most suited for a new paintjob and some TLC. £100 collection in Brighton, or I can post for an extra £10. I would prefer bank transfer if posted. Edited April 1, 2014 by matt-bass-sparkes
Recommended Posts