Boss BCB-60 Board / MXR Pedals

[lou24d53]

Hey,

I currently have a Boss BCB-60 pedal board and I’ve recently sold the few Boss pedals I used to use and have started renewing these with MXR pedals. Whereas the power socket on the Boss pedals is located on top of their pedals, the power socket from the MXR pedals is on the side, further down beyond the jack socket. I’ve not actually started putting my pedals back into the board as yet, but I’m already anticipating that the daisy chain power lead supplied with the Boss board is not going to be long enough to reach each MXR pedal whereas it was perfect for the Boss pedals.

What I’m asking, any idea where can you get either (1) a daisy chain lead with longer cable sections between the sockets or (2) daisy chain extension leads such as this one - [url="http://www.gak.co.uk/en/diago-ps07-pedal-board-daisy-chain-extension/82849"]http://www.gak.co.uk...extension/82849[/url] - cheaper than the Diago ones at £5.99 each supplied by GAK?

Thanks for listening...
Dougie.

Edited September 19, 2013 by lou24d53

[The Cooler King]

Plenty of options on ebay. I just bought one of these

http://www.ebay.co.uk/itm/3-4-5-WAY-EFFECT-PEDAL-9V-DAISY-CHAIN-POWER-SUPPLY-CABLE-SPLITTER-TC-ELECTRONICS/161013483855?_trksid=p2046732.m2060&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D16548%26meid%3D1396707060803823451%26pid%3D100040%26prg%3D7839%26rk%3D1%26rkt%3D4%26sd%3D161013483855%26

[lou24d53]

Sorry, should've explained better, I'm still wanting to use the cable channel to house the connection leads, so I'm looking for the cables to be long enough between the sockets to go from one pedal back round the cable channel and into the next...

Yeah, I know.....OCD is a bugger!!!!