Murph_Orpheus Posted April 17, 2008 Share Posted April 17, 2008 Ok so I've put together my first rack system but I was never able to get my head around the whole input/output thing etc. So what goes where connection wise at the back to make it all work together? I have a pre-amp, a compressor and a rack tuner. Cheers in advance for any help! Quote Link to comment Share on other sites More sharing options...
neilb Posted April 17, 2008 Share Posted April 17, 2008 No power amp then? Quote Link to comment Share on other sites More sharing options...
Murph_Orpheus Posted April 17, 2008 Author Share Posted April 17, 2008 Nope, I'm using a mesa boogie big block Quote Link to comment Share on other sites More sharing options...
neilb Posted April 17, 2008 Share Posted April 17, 2008 Bass > Preamp. Compressor in the effects loop of the preamp. Either connect tuner to the TUNER OUT on the pre (if it has one) or split the EFFECTS OUT to both the TUNER IN and the COMP IN. I tried running the signal through the tuner but it coloured my sound too much, but I do have the cheap Behry tuner. Quote Link to comment Share on other sites More sharing options...
Murph_Orpheus Posted April 17, 2008 Author Share Posted April 17, 2008 Cheers Neil, the mesa does have a tuner out so that should sort me out. Much appreciated Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.