fmb
-
Posts
10 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Shop
Articles
Posts posted by fmb
-
-
4 hours ago, Baloney Balderdash said:
From the information on Artec's homepage however it says that the Q value (bandwidth) is only adjustable between 4 to 7, which would be a relatively narrow bandwidth.
I know at least that for general tone shaping I would have found a Q value that could be adjusted between 0.5 to 4 much more useful.
Good to know, thank you!
-
The Artec Parametric EQ is cheap and readily available, but I have no experience with it.
- 1
-
Something like the Tech21 PSA 2.0 could fit, it was also on sale a few months ago.
- 1
-
53 minutes ago, asingardenof said:
You could take a look at the Harley Benton SpaceShip series, e.g. the 50M (505 mm x 175 mm x 38 mm)?
Fmb
- 1
-
When I was on the market for a looper I was interested in the:
- NUX NDL-5 JTC Drum & Loop Pro (around 150 € with drum loops and 6 hours recording time)
- Lekato guitar looper (around 60 € with 3 loops and memory up to 10 minutes total, with tuner)
I don't own them, and I find the second one only on Amazon.
Fmb
- 1
-
8 hours ago, kevin_lindsay said:
She used a Zoom B3n and a Boss OC -5 for the synth, and octaves, sounds respectively.
She used a Zoom B3.
I don't know if this changes something.
Fmb
-
For a three button setup I'd go:
Zoom B3n (I own it): cheap multifx, with some patience you can do more than what you are asking for;
Tech21 SansAmp PSA 2.0 (I own it): fully analogue, already suggested, now cheap, not really an EQ pedal, I suggest you to give a look to the Tech21 bass presets demo.
Two Notes ReVolt Bass Preamp: I don't own it, but it seems to fit your request.
fmb
- 1
-
7 hours ago, lidl e said:
reading more about it, i think this is exactly what i need!
.
i'm trying to figure out if the series/parallel switch would help with the phase issue
cheers.
The phase isssue is managed with internal switches (you need to open the pedal).
The series/parallel switch is used to determine how the input signal is routed through the A and B FX loops: in SERIES the FX loops are cascaded into one another, in PARALLEL mode the input signal is routed to the A and B FX loops simultaneously and you can mix them at the output.
https://www.ehx.com/wp-content/uploads/2021/03/Switchblade-Pro-Manual-2021-03-19.pdf
- 1
-
I'd go with an Electro Harmonix Switchblade Pro DLX.
It's got blendable clean, return A and return B, can do serial chain if wanted and even has phase shift switches (need to open the pedal).
- 1
BOSS ME90B (here at last)
in Effects
Posted
@Owen Look for "Boss ME-90B Parameter Guide"