Jump to content
Why become a member? ×

MixMan

Member
  • Posts

    15
  • Joined

  • Last visited

Posts posted by MixMan

  1. [quote name='Chest Rockwell' timestamp='1354882798' post='1891547']
    Well, I finally went ahead and did it!

    Had the laptop on and ready to go in case I needed to refer to this thread, followed my nose, started with the screws and had the things swapped out in no time. didnt even open up the web browser. Then took the toastery beast to practice and lo and behold it didnt blow up/fry!

    the sound was lovely!! I never had a problem with the gain, but what it did give me is a far fuller, warmer sound. a little less of the clank I get when i go 'clean'. with my big muff on it was just more of the same, full and warm, but with the distortion that i usually play through. guys in the band were most complimentary too. :happy:

    lets hope the next sound guy that DI's it is equally happy and I'll be quids in! :yarr:

    cheers all!
    [/quote]Which valves did you go for ?

  2. [quote name='umph' timestamp='1353025687' post='1870821']
    Hiya, think you've got the power ratings wrong on this amp, it's 300watts into 2 or 4ohms.

    great amp though, soundguys love the di!
    [/quote]

    Thanks for correcting me if that is true.
    I have looked everywhere for a manual and haven't found one.
    A lot of people on the net claims that it's 400 though, but you might be right.....

    Anyway. The thing is ridiculously loud and sounds great !
    And it needs to go now, so get in contact.

  3. Hi Mate

    I might be interested in a swap.
    I have got a Trace Elliot V6.
    400 Watts (fully valved).
    All working.
    A couple of tiny marks around the Speaker Output on the back and a few marks on the leather handle.
    Apart from that it's rock n roll.
    I'm London based but gig all over the UK, so it should be possible to hook up.


    PM if you're interested.
    I have got pictures of the amp, and I can give you more info about myself and the story of the amp etc

    Cheers,

    Andreas

  4. Ok.

    This babe has got to go.
    It's been gathering dust for some time and it's clean up time.

    A couple of scuffs on the leather handle and a few scratches on the back, but in full working order:

    400 watts valve monster.
    Amazing !!

    Drop by (North London) and try it out and if you want to.

    Seriously guys. Step in the ring.


    Fully valved amp like Ampeg SVT2 pro, Ampeg CL, Fender Bassman, Orange, Hiwatt etc….

    Pre-amp: 4 x 12AX7
    Power amp: 6 x KT88
    400 Watts (RMS) 800 Watts (Peak) 4ohm
    600 Watts (RMS) 2ohm
    HP jack and XLR Connectors
    Input passive/active (-10db)
    FX loop send/return

    Controls:
    Gain, Bass, Middle (push-pull boost to 500hz), Treble, Master
    Switch Loud, bright (bass cut)

    (New Price) £700....anybody ?



    [attachment=123204:IMG_0360.jpg][attachment=123205:IMG_0361.jpg][attachment=123206:IMG_0362.jpg][attachment=123207:IMG_0363.jpg][attachment=123208:IMG_0365.jpg][attachment=123209:IMG_0366.jpg][attachment=123210:IMG_0368.jpg][attachment=123210:IMG_0368.jpg][attachment=123211:IMG_0370.jpg][attachment=123212:IMG_0373.jpg][attachment=123213:IMG_0374.jpg][attachment=123214:IMG_0375.jpg]

  5. I'm selling a brand new boxed Joyo Dynamic Compressor.
    Has only been used once. No faults, no scratches.
    Very good for the price, but not enough knobs for me.

    £20 + shipping or free pickup

  6. [quote name='martindupras' post='505596' date='Jun 4 2009, 05:03 PM']I'm interested. Where are you located? I'm in Bristol.

    Cheers,

    - martin[/quote]

    I'm in Kensal Rise, West London.....

    You are welcome to drop by for a play next time you're in town....
    -Or I can send the cab to you if you want it.

    Get in contact if you want more info.

    Cheers

    Andreas

  7. Hi Mate
    Sorry about not getting back to you.
    Have been really busy.
    Cab is still here.

    To be completely honest with you, I dont know how to work the camera in my phone.....so no pics I'm sorry.
    However, you are very welcome to pop by and have a look. I'm in Kensal Rise, West London.

    Here's a more detailed discription of the cab. Hope this helps. :

    -There are no tears in the cloth/wood !!
    -The lower four corners are quite worn (down to the skrew heads....but not to the wood) These corners can easily be replaced....they only cost about £3 each......
    -One of the handles have had a bashing a few years ago, is slightly bend but works fine, and has done for quite q few years.
    -The front protective metal net looks good apart from a skratch on the metal label where it says "Hartke Systems -Transient Attack".
    -The cab sounds really fat, and is not even compareble to the new cheaper thinner sounding ones, which I would personally never buy.

    Get in contact if you want to know more or drop by for a play.

    Cheers

    Andreas


    [quote name='Badass' post='511373' date='Jun 11 2009, 04:25 PM']Still no images :)[/quote]

  8. Hi Mate
    Sorry about not getting back to you.
    Have been really busy.
    Cab is still here.

    To be completely honest with you, I dont know how to work the camera in my phone.....so no pics I'm sorry.
    However, you are very welcome to pop by and have a look. I'm in Kensal Rise, West London.

    Here's a more detailed discription of the cab. Hope this helps. :

    -There are no tears in the cloth/wood !!
    -The lower four corners are quite worn (down to the skrew heads....but not to the wood) These corners can easily be replaced....they only cost about £3 each......
    -One of the handles have had a bashing a few years ago, is slightly bend but works fine, and has done for quite q few years.
    -The front protective metal net looks good apart from a skratch on the metal label where it says "Hartke Systems -Transient Attack".
    -The cab sounds really fat, and is not even compareble to the new cheaper thinner sounding ones, which I would personally never buy.

    Get in contact if you want to know more or drop by for a play.

    Cheers

    Andreas



    [quote name='Badass' post='511373' date='Jun 11 2009, 04:25 PM']Still no images :)[/quote]

×
×
  • Create New...