Yardicus
-
Posts
29 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Shop
Articles
Posts posted by Yardicus
-
-
On 10/06/2018 at 17:59, Geek99 said:
Get them sent to one of us then we will forward on to you
Got sorted with another eBayer 👍
-
What’s the maximum length of the straps?
-
Bought an Ashdown hyperdrive pedal from Painy.
Great comms, kept up to date throughout, parcel was excellent and item arrived in great condition.
Deal with confidence.
Thank you!
-
The eBay seller won’t post me a set as I live in Northern Ireland, what a PITA.
-
-
27 minutes ago, tommorichards said:
Funnily enough, I ended up finding what I hope to be a direct replacement for the old one, as mine uses threaded captivated nuts which are stronger than screwing in a wood screw. I started looking for a replacement wheel but I found one with the right dimensions on ebay. With luck they'll be here ASAP, and I can see if they work.
This is them in case anyone is after some as well.
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F282329357464
Excellent I’m after 2 for my 610.
-
-
-
17 minutes ago, GBH said:
Hipshot kickass, just fitted one to my jazz, huge improvement in tone, adjustable spacing, no grooves to cut unlike an original badass, and drops straight onto a fender. Paid £49 delivered from an eBay seller in the US.
I bought one from a US ebay shop as well and it’s great for the adjustment, came in less than a week!
-
25 minutes ago, dood said:
I wanna red set lol. Can only find blue or black..
- 1
-
Seller told me this was sold in March
-
-
UK built fdeck I had it built in August last year at a cost of £90
-
I had an Fdeck hpf made a few months ago I can look for the details if you like.
-
In the last 12 months my SVT CL has blown a power valve twice, the same position both times!
local tech can’t find anything wrong with it, Derek at Watford Valves says it’s dry joints, so I had the tech reflow them, fingers crossed!
My SVT is Korean made btw.
-
Can I have them please
-
I think this is the one.
https://www.mcmaster.com/#92765a005/=1btebms
I dont know where you get them in the UK tho.
-
Bought an SFX micro Thumpinator from Gilles.
Excellent communication with updates and pictures along with tracking information a very smooth transaction.
Highly recommended!!!
Thank You Gilles
-
I have 2 boss FS-5U foot switches plugged into the stop/memory shift jack via a stereo (TRS) to mono “Y” cable (the FS 6 or 7 might work too)
pedal to start loop / intro
1st FS-5U stop loop / intro
2nd FS-5U cycle up or down loops / intro
There are loads of smaller switches that work too.
-
I use a boss RC-3 loop station for intros and inbetween song ambient pre recorded loops
-
PM sent
-
[quote name='Norris' timestamp='1506275469' post='3377533']
A resistor would convert the power into heat. If you recall how hot an old 100W filament bulb used to be...
Edit: Actually I wonder what the resistance of one of those would be. It wouldn't do your amp much good when the bulb eventually blows though!
[/quote]
You wouldn’t have to use a bulb maybe something built for that specific purpose, how about an 8ohm cab and something like an 8ohm THD Hotplate set to load, would that achieve 4ohms, thus protecting the output transformer? -
[quote name='Bill Fitzmaurice' timestamp='1506271897' post='3377496']
Thus sending 150w to the cab and 150w to the resistor.
[/quote]
Wouldn’t that offer the head some protection tho?
8ohms is outside the design spec of the SVT CL head, 150w is better than damaging an output transformer. -
Would something like this be useful for the likes of an Ampeg SVT CL head?
The head is 4 ohm or 2 ohm only, faced with an 8ohm cab I could drop in line an 8ohm resistor and run my head at 4ohms.
My Whitesnake transcriptions
in Theory and Technique
Posted
Excellent thank you very much Neil 👍