vinbob

Hi I bought this amp a few months ago and I'm struggling to get a clear sound out of it, mainly the low end notes really. I play a fender p bass, and don't go through any pedals except maybe sometimes a big muff pedal and a tuner. Any thoughts?

Thanks everyone,

Job done it seems, lowered the action to where i want it and feels much better, and intonation is all good. So fingers crossed i think I've done it!

Thanks for all the feedback, I think I will give it go myself then, I had a load of Allen keys but none of them fitted, so thought it must have been specialist tools

Hi Guys,

Just after some advice.

I have just bought a 2nd hand fender precision which i love, but the action is real high to what i am normally used too. As in on this bass the E string is far off the fret board and decreases on each string, with the G string being quite close. Should they not all be the same amount of the fret board?

Also if i get someone to set it up for me do i have to have new strings fitted or can i use the ones on as i think they sound okay to me.

Any advice would be appreciated.

Many Thanks

Vin

its not new, just in good condition (or was at least) more worried that if the paint is cracked it might eventually flake off leaving me with a little bare patch

Hi guys,

Just bought my new fender precision bass which i love, and within about an hour of having it a drill fell from nowhere and has put a dent in it, its about 3 or 4mm long and a 1.5mm deep but i think it may have just cracked the paintwork slighty. Its a dark 3 tone sunburst.
Any advice on how to fix the dent to make it look brand new or just to prevent it getting any worse.

Any help would be grateful

thanks

bump

[color=#282828][font=helvetica, arial, sans-serif]Hi all,[/font][/color]

[color=#282828][font=helvetica, arial, sans-serif]up for sale is my Behringer BXL3000A combo, its 2 years old and has been gigged a bit but its in good condition, only the cloth around the amp is scuffed a bit from transport etc. I am willing to let it go for just £50 as i have no use for it. Need any information just contact me thanks. Can't upload my pic at moment this is just a copy from net. I am located in Middlesbrough.[/font][/color]

[color=#282828][font=helvetica, arial, sans-serif]Thanks[/font][/color]

[color=#282828][font=helvetica, arial, sans-serif][/font][/color]

Anybody interested, make an offer

Bump

Bump

Hi sorry about slow reply the weight is 27kg

Bump

Hi all,

up for sale is my Behringer BXL3000A combo, its 2 years old and has been gigged a bit but its in good condition, only the cloth around the amp is scuffed a bit from transport etc. I am looking for £110 ONO. Need any information just contact me thanks. Can't upload my pic at moment this is just a copy from net. I am located in Middlesbrough.

Thanks

Hi, thanks for all the advice again. If i was to buy the head i was looking at The ashdown Mag 300 head could i put it with the ashdown 2 x10 cab or maybe even a peavey 2 x 10 cab?

im a young dude so 4 x 10 will do me for now, if i find its too much i can always come back on here and trade for a 2 x10 couldn't i. Thanks everyone for your help. much appreciated

vin

Hey

this ashdown MAG 300 and ashdown 4 x 10 cab i am looking. Can i add another Cab to it in the future if i need to?

Hi guys

Yes i almost always play through a PA system, whats your thoughts on this, (especially sound wise?)

Ashdown Mag 300 Head (300 watts)
[color=#000000]
[font="Arial"][size="2"]Ashdown Mag 4x10 Cab[/size][/font][/color]
[color=#000000]
Someone is selling one on here for around £250/300[/color]

Ok guys,

Thanks for all the advice. The marshall's were suggested by a friend. But i am leaning towards to the Peavey setup. I played one a few months back and it was the sound i have wanted for a while. I am not sure exactly what model it was but i think it was a 4 x 10 cab with a peavey head. But i have been looking at the heads and they are very expensive.

I don't play in pubs more real music venues between 100 and 500 people, so maybe you could suggest what size cab i should get and if there is any other type of head that would go with the cab that isn't too expensive.

Thanks for all the help

hi,

i am new to this site but you all seem good guys. Looking at upgrading from a combo amp to separate head and cab, but not sure what works with what. looking at these two, would they go together ok?

Marshall MBC410 cab 600/1200w 4 ohms

Marshall MB450H B-Stock 450w, hybrid amp with ECC83 tube

Could i buy this head and put it with a different cab. I like Peavey amps i have used before so if anyone has any suggestions please help

Thanks