Austin1303

Do you still have the flashback?

Interested in the Flashback...PM'd

I have decided to split this board and sell the pedals separately.

Hi,

Re-listed as I made a mistake when posting originally.

Switch-3 for use with TC Electronic nova system, BH250 and BG250.

I have two for sale, in their original boxes with the cable.

Great condition, cost £40 new, asking for £28 (each) posted or make me an offer...

Cheers,
Austin

Website: http://www.tcelectronic.com/switch-3/
Pictures: https://imageshack.com/a/uhnz/1

Sold.

Sold.

I've had a few people ask about this so I'm putting the sale on hold until I can confirm it's sold. Cheers!

[color=#282828][font=arial, sans-serif][size=3]This is now SOLD.[/size][/font][/color]

[color=#282828][font=arial, sans-serif][size=3]I have a another TC Electronic gig bag up for sale, came bundled with something else I bought! I bought the previous one for my mainly for my BH250 which can been seen in one of the photos, but is [b]not included[/b]!! It is primarily made for the TC RH450/RH750 heads but as you can see, it fits the BH250 very well too. There are plenty of pockets for leads and other accessories and it has great padding. Good all round condition.[/size][/font][/color]

[color=#282828][font=arial, sans-serif][size=3]Looking for £20 posted anywhere in the UK but I'm open to offers...[/size][/font][/color]

[color=#282828][font=arial, sans-serif][size=3]Cheers,[/size][/font][/color]
[color=#282828][font=arial, sans-serif][size=3]Austin[/size][/font][/color]

[color=#282828][font=arial, sans-serif][size=3]Pictures: [/size][/font][/color][size=3]https://imageshack.com/a/5hnz/1[/size]

Sorry for the silence...had a few things going on recently but i'm all sorted now. This is still for sale, or possibly a trade if anyone is interested...?!

Finally I wired up all of the pedals from the power supply. I then used lava cable for all of the audio cabling which was again routed in the board. The finished product looks like this...

I am happy with how it turned out and will give it a good test drive at the weekend

When it was all dry, I fitted all of the parts such as the plate, junction box, jack sockets, feet and grommets. I then attached the power supply using velcro and routed the cable into the box. At this point I also fixed all of the pedals on top using velcro again. I fitted the power cable to nova system and run this into the junction box. i was then able to wire this up and fit the cover...

With all the holes drilled I could now paint the board, I rubbed it down, applied two coats of primer, three coats of colour and two coats of lacquer. I also painted the plate and junction box...

I drilled some holes to access the inside of the box section at strategic places, these were line with grommets to tidy up the edges. I also made a plate to cover the two large holes and mount the power plug as well as a junction box for the wiring. Finally, I drilled two holes for the two jack sockets...

The board before I started any work...

Hello,

I just thought I'd share this project which I have just completed.

A few months back I decided that I was going upgrade my pedal board from a pedal train mini to a pedal train junior. This was to accommodate a TC Electronic nova system into my set up. I wanted to get the following out of this project:[list]
[*]Have input/output jacks mounted on the board.
[*]Have one mains voltage IEC plug on the board for both the nova system and power supply.
[*]Route the cabling inside the pedal train box section
[*]Spray the board metallic red to match my TC gear.
[/list]
The pedals which I wanted to put on the board were:[list]
[*]TC polytune mini
[*]TC ditto looper
[*]MXR bass compressor
[*]TC nova system.
[/list]
I decided to use a Harley Benton power supply for the compact pedals as it was well priced, had great reviews and came with a stack of cables. I'm pleased to say it hasn't disappointed.

I managed to pick up a second hand junior with hard case for £60 on eBay so with that in hand I could begin...

Still for sale

Bump...

Can't bring myself to take any less than this, especially as it includes the hard case... £200!

Price dropped to £220 including hard case (~£230-240 delivered)

Between Ipswich and Bury St Edmunds

This is now SOLD.

Hi, I have my Squier Vintage Modified Precision Bass up for sale.

This is a reluctant sale but I have just bought a Fender Jazz, also I am getting married this summer and although I prioritized, there was no interest in the other half so this will have to go instead.

I bought this brand new about two years ago and have rehearsed and gigged with it up until buying my Jazz last month. I believe that the Vintage Modified series are some of the best offerings from Squier and this is reflected by their Seymour Duncan designed pickups and lovely natural finish.

The essentials are:[list]
[*]Glossy natural finish with black scratch-plate (unfortunately the black shows up the scratches more than usual)
[*]Maple neck and fingerboard (small dye mark next to ninth fret from factory, see photo)
[*]4 string, 21 frets
[*]Passive Duncan designed pickups
[*]Volume and tone controls
[/list]
I always look after my gear as best as possible but I will admit it has had the odd small knock when gigging in tight spaces, but this has always been followed by a brief inspection to check it's all okay. Also please note that the fender strap-lock pins seen in the photos have been swapped back for the original pins and are not included in the sale.

I had this bass set up at a music shop last summer before I recorded with it and it has recently been re-strung.

I hope someone can give this lovely bass a home, it's a fantastic bass for the money and the pickups sound great for it's price range. Any questions, please ask.

I am looking for £200 including the shaped hard case and I'm more than happy to post the bass for an additional £20, refunding the difference if it costs less. I am based in Suffolk and open to sensible offers...

Cheers,
Austin

[color=#282828][font=arial, sans-serif][size=3]Hi,[/size][/font][/color]

[color=#282828][font=arial, sans-serif][size=3]Just the one pedal for sale now:[/size][/font][/color]

[color=#282828][font=arial, sans-serif][size=3][u][b][s]MXR M132 Super Comp[/s] [SOLD][/b][/u][/size][/font][/color]

[s][color=#282828][font=arial, sans-serif][size=3]H[/size][/font][/color][color=#282828][font=arial, sans-serif][size=3]as been used but works perfectly.[/size][/font][/color]
[font=arial, sans-serif][color=#282828][size=3]Comes with the ori[/size][/color][/font][color=#282828][font=arial, sans-serif][size=3]ginal box.[/size][/font][/color]
[color=#282828][font=arial, sans-serif][size=3]Looking for £50 posted anywhere in the UK[/size][/font][/color][/s]

[color=#282828][font=arial, sans-serif][size=3][u][b]DigiTech DigiVerb[/b][/u][/size][/font][/color]

[color=#282828][font=arial, sans-serif][size=3]H[/size][/font][/color][color=#282828][font=arial, sans-serif][size=3]as been used but works perfectly.[/size][/font][/color]
[font=arial, sans-serif][color=#282828][size=3]Comes with the ori[/size][/color][/font][color=#282828][font=arial, sans-serif][size=3]ginal box.[/size][/font][/color]
[color=#282828][font=arial, sans-serif][size=3]Looking for £45 posted anywhere in the UK[/size][/font][/color]

[color=#282828][font=arial, sans-serif][size=3]Open to offers...[/size][/font][/color]

[color=#282828][font=arial, sans-serif][size=3]Cheers,[/size][/font][/color]
[color=#282828][font=arial, sans-serif][size=3]Austin[/size][/font][/color]

Hi,

[s]I have a guitar hard case for sale. it fits most different types of guitars as can be seen by the photos. Please not that the guitars are [b][u]not included[/u][/b]!!

Price is for collection from mid Suffolk, will post at an additional cost. Open to offers...[/s]

[b]THIS IS NOW SOLD[/b]

Cheers,
Austin

[s][font=arial, sans-serif][size=3]Hi,[/size][/font]

[font=arial, sans-serif][size=3]I have a TC Electronic gig bag up for sale. I bought it for my mainly for my BH250 which can been seen in one of the photos, but is [b]not included[/b]!! It is primarily made for the TC RH450/RH750 heads but as you can see, it fits the BH250 very well too. There are plenty of pockets for leads and other accessories and it has great padding. Good all round condition.[/size][/font]

[font=arial, sans-serif][size=3]Looking for £20 posted anywhere in the UK but I'm open to offers...[/size][/font]

[font=arial, sans-serif][size=3]Cheers,[/size][/font]
[font=arial, sans-serif][size=3]Austin[/size][/font][/s]

[font=arial, sans-serif][size=3][b]SOLD[/b][/size][/font]

[font=arial, sans-serif][size=3]Hi,[/size][/font]

[s][font=arial, sans-serif][size=3]I have an MXR M87 Bass Compressor up for sale. I bought it to replace mine which I thought had just given up. However, it turned out to be combination of a faulty power supply output and a defective power cable to the pedal![/size][/font]

[font=arial, sans-serif][size=3]This is a fantastic pedal and I use it all the time, hence why I was so quick to buy another when I thought it was out if action.[/size][/font]

[font=arial, sans-serif][size=3]I paid £175 for this and have taken it out of the box therefore I can't return it. It hasn't been used, just taken out of the packaging, all of the manuals etc. are present.[/size][/font]

[font=arial, sans-serif][size=3]Looking for £150 posted anywhere in the UK but I'm open to offers...[/size][/font][/s]

[b]THIS IS NOW SOLD[/b]

[font=arial, sans-serif][size=3]Cheers,[/size][/font]
[font=arial, sans-serif][size=3]Austin[/size][/font]