jay42

Hi all

Call me a crazy muppet but I have just entered the realm of 7-stringed fretless basses and I'm wondering if there is such a thing available as a 7-string Flatwound strings set?

If anyone knows of such a thing and where to get them (ideally in the UK) then I'd be very grateful!

Jay

Hi folks

Does anyone have any recommendations for a good quality active 5-string with 19mm string spacing? No Jazz-styles as sadly I don't get on with them...

Any thoughts would be very welcome!

Jay

Hi, by any chance is this still available??

Hi folks

I have one of these awesome ShuttleMAX 12.2 amps which I absolutely love; I know this will be a long shot but does anyone have or know where I can get hold of a set of rack ears for it?

I'd love to put this unit in a rack but I haven't a clue where to look for the ears!

Many thanks

Jay

Hi folks

I've just acquired a Genz-Benz ShuttleMAX 12.2 and I gotta say, this amp is beyond awesome!

The only thing with it is that the mute switch on the front panel does not work but it does have the option of connecting an external mute switch.

My question is this; would anyone know if using an external switch to mute would work and secondly where could I get a latching mute switch from?

Jay

Just been studying the manual and getting a headache lol From what I understand, the Effects Loop is positioned in the signal chain AFTER the compressor so that being said, I'm guessing if I connect the Full Send to my DI box then it will include everything

There is no substitute for actually trying this out, I just wanted to get a little advice before I actually did it!

Hi guys

Yes, I should have been more specific, it is the Peavey-era AH1200 I have. 'Old' Trace did an AH1200SM head that was extremely rare and ridiculously powerful but I've only ever seen 1 in the flesh so-to-speak.

Thank you for the info, I've been trying to figure out another way of getting the full range signal to the PA without having to use 2 channels. Would connecting the Full Send out to a DI box then to the PA work??

Hi folks

I have a quite wonderful TE AH1200-12 however I have a quick question that I'm sure one of you knowledgeable folks can answer:

I have configured the rather extensive Effects Loop to create a crossover where the low frequencies are sent to the left power stage and the high frequencies are sent to the right power stage, my question is this; when DI'ing to the PA, would connecting one of the Post EQ DI outputs still send the whole signal (ie both low & high frequencies) to the PA or would it only send the corresponding low or high frequencies depending on whether I connected the left DI output or the right one?

I would appreciate any help with this as I would prefer for the PA to receive a Post EQ signal rather than a Pre EQ signal!

Jay

Hey, thanks for the feedback guys

Seriously I'd love to go all out Trace-style with four cabs however I won't survive the beating I'll get from my bandmates lol Incidentally, my amp does happen to be a Trace Elliot...! 

That's why I asked the question; in my mind if I went for 4 Ohm cabinets I could utilise full power from the amp but with only two cabs but then at the same time I like the flexibility of the 8s in that although using only a single channel I could always add if I wanted to...

Still undecided! 

Hi folks

I have an amp with 2 x 600W power stages that can drive down to 4 Ohms each side. 

My question is this, would getting two 4 Ohm cabs be more advantageous connecting one each to each channel or getting two 8 Ohm cabs for better flexibility? 

I'd be interested to hear opinions! 

Jay

Hi folks

Last night at my gig, I unpacked my trusty RH750 head and discovered that the bass eq control knob had split in two and fallen off, does anyone here know where I can get replacements? 

I've had a look on everyone's favourite auction site but to no avail...any help would be much appreciated!

Hi bass folks

I have a TC Electronic Blacksmith head which I love to bits which I run through a TC RS410 cab but it is lonely and needs some other cabs to keep it company :)

The question I have is this; as the Blacksmith can be switched down to a 2 Ohm load rating, you can run up to 4 of the RS cabs from it but what I want to know is would the following configuration be possible:

• Blacksmith in 2 Ohm mode connected to 1 x RS410 and 2 of the K-Series K210s

I love the look of the K-Series cabs and I intend to get 2 K210s to pair with an RH750 to use for smaller gigs but for bigger ones I would prefer to use my Blacksmith with the above combination of cabs if possible.

I know that TCs Ohm ratings and cab combinations have been a topic for many years on here and I hope that one of you learned folks would be able to answer my query!

All the best!

Jay

This is such an awesome rig but I can already hear my back complaining lol Are you willing to sell the amp by itself or will it all be as one package?

Cheers guys...I'm kinda torn because with my sensible bass playing hat on there's probably no scenario realistically that I would need to run two channels at 4 Ohms other than for pure self-satisfaction but I quite like the idea of having the option if I wanted too! 

I currently run a TC Electronic Blacksmith that has the capability of running at 2 Ohms (potentially using four 4x10s) and it is a very very good piece of kit but I've always loved Trace gear and I miss that tone. 

I had a mid-90s AH600SMX head which had 2 power amps just like the AH1200-12 and that was a beast and I regret parting with it to this day...

By the way the amps I am looking at are the newer Trace ones not the old vintage stuff so I'm hoping that the newer ones are just as loud!

Hi bass folks

I've been hankering after one of either the TE AH600-12 or the AH1200-12 heads and I was wondering if anyone has any experience of either them in terms of tone, quality, reliability etc and whether having 2 separate power sections of the AH1200-12 are actually needed or would the 600W section of the AH600-12 have enough beef? I'm assuming that tone-wise, both would be the same.

Any info would be greatly appreciated!

Jay

Hi folks

I've just acquired a fantastic Blacksmith head and literally love everything about it :) I want to flight case it but I'm not sure what size rack unit to get for it, a 4U or a 6U, anyone know what size it takes?? 

Jay

For Sale

Ibanez SR1300-NTF Premium 4-string bass.

Mint condition and a complete joy to play with a killer sound thanks to the Nordstrand p/ups!

This bass' reputation preceeds it in terms of its verstility, playability and cratfmanship.

Comes with Dunlop strap locks installed on the bass and on the accompanying strap. Also comes with the Ibanez Premium-branded fitted case (a cross between a soft case and a hard case) and the Ibanez toolkit.

Inbox me for any further info and pics!

Please see the link below from the Ibanez website which will tell you all you need to know!

[url="http://www.ibanez.com/products/eb_detail17.php?year=2017&area_id=3&cat_id=2&series_id=51&data_id=70&color=CL01"]http://www.ibanez.co...d=70&color=CL01[/url]

Hi bass people :-)

I hope you can help me with a query :-) I'm looking at getting a wireless system to use on stage as I'm a complete klutz with regards to cables and I'm sure I will do myself a bodily injury at some point from tripping over the damn things, my query is this; a lot of the wireless units I've been looking at are those little mini plugs that just plug straight into the bass jack as opposed to a bodypack. Now given the sculpted nature of the input jack on Ibanez SR basses, would it be possible for one of these to fit in?

I'm tempted to try a couple but I don't want to run the risk of damaging the bass! Have any of you learned people ever tried one with an SR bass?

Any assistance would be greatly appreciated!

Hi, is this still available?

Hi, I know this is a long shot but is this head still available?

Hi folks

I'm after a little technical advice! I don't even know if this is possible but I'd be interested in knowing the answer to this.

I am really taken with the Ashdown Superfly amp with the programmable settings, MIDI control etc but I am aware that although the pre-amp section is very impressive, the power amp section leaves a lot to be desired in terms of on-stage volume and also the fact that is has 2 x 250W power amp sections requiring two 4 Ohm cabs to even get full power.

My query is this; is there any way of taking a line out from the Superfly pre-amp section and connecting it to the power amp section of the Ashdown ABM 500RC EVO III that I use on stage thus using the Superfly as pre-amp only and using the ABM 500 as a power amp? Could this be done via using the FX Loop Send (which I think could also be used as a pre-amp out??) from the Superfly and connecting it to the FX Loop Return on the ABM 500?

I apologise if this is slightly confusing but I'd be extremely interested in knowing if this is possible as I'd love to use this set-up in my rig!

Many thanks in advance!

Jay

Hi folks

I'm just wondering if anyone has ever tried the 1000W version of the Superfly and if so, what is it like in terms of performance? I know the 500W version is somewhat underpowered unless used with 2 4 Ohm cabs.

Also does anyone know of or has any for sale?

Jay

Hi fellow bass people

I'm getting serious GAS for the Trace Elliot AH1200-12 amp; does anyone have one of these and if so, I'd love to hear a review of some kind!!

Many thanks in advance!

Jay