TonyRamwell

This is my feedback page!

I sold my EBS HD350 amp to David, I have to say that this was amongst the easiest transactin I have ever had.
Clear lines of communication and paid within minutes of agreeing a price!

I highly recommended David to anyone that has cause to deal with him.

Bump for price drop

Weekend bump!

Bump

bump

Thanks Steve...

SOLD


Hartke 2.5XL & 115XL Speaker Cabinets.

In fantastic condition!

They sound amazing together but also great in their own right!

If you are interested in both the cabs I would accept £250

Split I'm looking for

£160 for the 2.5XL
£140 for the 115XL

I would prefere pickup, from Twickenham (West London), however if you wanted to arrange your own courier this could be discussed.

PM me if you are interested.

Thanks,
Tony

Full spec is

[b][u]2.5XL[/u][/b]

[attachment=60591:Hartke_2_5XL.jpg]

Expanded-Design" Tuned, Ported Cabinet
Custom Hartke 5" Aluminum-Cone High-Frequency Driver
Two Hartke XL 10" Aluminum-Cone Bass Drivers
Power Handling: 200 Watts @ 8 Ohms
Frequency Response: 35 Hz To 12 kHz
Sensitivity: 99 dB @ 1 W/1 M
Voice Coil: 1.5"
Magnet Weight: 60 Oz.
1/4" Input
Dimensions: 18"(H) X 24"(W) X 18"(D)
Weight: 66 lb.

[b][u]115XL[/u][/b]

[attachment=60592:Hartke_115XL.jpg]

Specially Tuned, Duct-Vented Cabinet Design
Precision Hartke XL 15" Aluminum-Cone Bass Driver
Power Handling: 200 Watts @ 8 Ohms
Frequency Response: 30 Hz To 2.5 kHz
Sensitivity: 98 dB @ 1 W/1 M
Voice Coil: 3"
Magnet Weight: 100 Oz.
Parallel 1/4" Inputs
Dimensions: 24"(H) X 24"(W) X 15"(D)
Weight: 63 lb.

bump for price drop

Bump

bump

***Sold - Pending Payment Being Received***


Hello,

Up for sale is my EBS HD350 Head, including a 4U flight case

Due to work comitments I have left the UK and will not be returning in the foresable future.

This is an amazing piece of kit and in great condition althought there are some minor scuffs and marks on the flight case.

Offers around £425.

PM me if you're interested .

EBS HD350 Bass Amp

Input Impedance 1 Mohms
Frequency Response 35 - 20.000 Hz
Maximum Compression Ratio (Compressor) 3:1
Tone Controls Bass +/- 15 dB @ 100 Hz
Middle +/-12 dB @ 50 - 3000 Hz, Q=0.5
Treble +/- 15 dB @ 4 kHz
Bright -0/+20 dB @ 10 kHz
Drive Control Gain 0-30 dB
Drive Type Solid State
Other Features Character filters, Phantom power,
Effects loop and Balanced Output
Minimum speaker impedance 2 ohms
Dynamic Output Power 350 W RMS
Continuous Output Power 300 W RMS
Dimensions (W x D x H) 19" x 13" x 2U (48cm x 33cm x 9cm)
Weight 9 kg / 20 lbs

[url="http://www.bass.se"]http://www.bass.se[/url]

[quote]Direct Link

I've just spent the last hour or so browsing... I'm glad i know the Firefox Page Info trick to get the pics.[/quote]

So what's the trick then? Do share...

Got one of these last year used it quite a lot for rehab on a bad wrist break, seem to be stuck at 10484 though, having dug it back out I'm sure i'll be vying for the Bass Chat record soon.....

I don't really have a "party piece" as you may say, however I'd sure like to be able to bust this out!

Sunday night at the 3 Kings, Twickenham.

Bit of an emotional night the landlord, a close friend, has finally thrown in the towel and decided to close the doors forever... It was an awesome night 4 of the local bands (including ourselves) played for free and the place was jumping. Probably the best gig we have ever had.
We thought that we had rocked the place until the headline band (Skalectrix) came on, best band I've seen this year.

All in all great night (that finished at 5am), gutted another live music venue has gone!

I Wanna Be Adored - Stone Roses
Somebody Elses Guy - Jocelyn Brown

I can only echo the comments from everyone else, Top Cables!
Very quick and helpful, Thanks.

I always seem to be on the left hand side of the stage, always to the left of the hi-hats, there's no specific rule about it. Most of the places we play tend to have reletively small stages any other way I'd be clouting our singer in the face with the headstock!

Thanks for this guys, I was pretty sure I was best to go down this route but always worth checking.

As to the 2 Ohm, I knew about this and really wish I could afford better cabs, I've had my eye on the Epifani UL range but, can't see this happening for quite some time

Cheers,
Tony

Hi All,

I'm after a bit of advice, I am rubbish with the whole impedence thing...
All I know is that in theory if you connect 2 8 Ohm cabs you should get 4 Ohm, I think I'm right.

I have an EBS HD350 head that was running a Hartke 2.5XL 8 Ohm cab. I recently bought another cab the Hartke 115XL also 8 Ohm.
So the question is should I be using the 2 speakon connectors on the head, 1 per cab, to get the best config; or connect a cab to 1 speakon and then use the extension jack on the cab to go speakon -> Cab -> Cab.

Any help here is much appreciated.
Tony

Hi there everyone.

I’ve been incredibly rude and joined this site more as a voyeur than contributor…
Well it’s about time I righted my wrong and say an official Hello, so HELLO….
I’m Tony originally from Manchester now exiled in Kingston upon Thames. I started playing bass about 2 years ago after always wanting to get into it but just never getting around to it.
I joined my first covers band just over 8 months ago and we are getting a few gigs in the Twickenham area.
I love playing bass and pick it up everyday.

One good thing about starting playing later in life is the obvious extra money available to feed the GAS… (plus a friend who owns a guitar shop, obvious hook up's). I am now playing a Fender Marcus Miller 4 string through an EBS HD350 head and a Hartke 2.5 XL + 115 XL Cab.

Well that’s me hopefully I’ve made appeasement by saying hello.

Cheers,
Tony