Help adding blend to Jag

[Grissle]

I've got all the parts now I just need some help wiring things up. I want to retain all the functionality of the stock Jag wiring but stick a blend pot wired between the pups and the pup selector switch's. And where the Vol and Tone pots are just substitute a concentric Vol/Tone

My Blend pot wiring:
[url="http://i591.photobucket.com/albums/ss360/Grissle209/3764_3.gif?t=1249764857"]http://i591.photobucket.com/albums/ss360/G...if?t=1249764857[/url]

Jag wiring diagram:
[url="http://www.fender.com/support/diagrams/pdf_temp1/basses/0259505A/SD0259505APg2.pdf"]http://www.fender.com/support/diagrams/pdf...0259505APg2.pdf[/url]

Edited August 8, 2009 by Grissle

[Al Heeley]

Are you doing away with the pickup selector switches or coil cuts (24, top right?)?
If so then pickups straight to the dual-stack blend is correct with live going to the respective centre lugs.
On your inset diagram, top left and bottom right would go to ground, then top right and bottom left would go together to the vol part of the concentric pot, then the vol out would feed into the tone part of the concentric pot, with the tone cap as normal shorting to earth (on the back of the pot).
Not clear what you plan to do with the rest of the wiring eg: the active pre-amp bit or parts 24 & 12 ?

[Grissle]

I want to retain all the switch functions and preamp so maybe this can't be done?

[Grissle]

No worries, problem solved

Jag bass on steroids
[url="http://basschat.co.uk/index.php?showtopic=57199"]http://basschat.co.uk/index.php?showtopic=57199[/url]