Hazard lamps HL-1 preamp pedal £170.00 inc postage - *SOLD* £150 Wymondham

[patrikmarky]

Great preamp pedal if you want that vintage Spector sound from a passive bass simple and effective ..

in good condition and includes box ..

bass direct have these at £285.00 + postage 

   Looking for £170.00 inc uk postage 
 

 

 

 

Simple elegance in design and use is a goal with every product we create. The HL-1 HAZard LAMPS is made to do one thing: provide a simple solution to allow Spector bassist to switch to a favorite passive bass during a show without unbalancing the mix of the band. Period.

There are no extraneous controls: you have a bass and treble knob just like you’d get on the Spector bass with an active preamp, and a stomp button. Even though we don’t need instructions, here are the steps to use the HL-1 HAZard LAMPS pedal.

Plug in power.
The unit requires either 9volts or 18volts from an external power supply. Do NOT use more than 18volts because you’ll let the magic smoke out and you’ll be the owner of a fantastic-looking paper weight.
Plug your bass into the INPUT jack on the right side of the unit.
We recommend the HAZard LAMPS be the first unit in your signal chain so that it is as close to a built-in preamp as possible.
Plug the OUTPUT into your amp or other pedals in your signal chain.
Turn the knobs to the desired EQ. There is a center detent at the 12 o’clock position that indicates the FLAT EQ position. The thickness of the dial markings indicate EQ zones:
a. CCW (thin line) is EQ CUT.
b. CW (thicker line) is EQ BOOST.
c. CW (fat line) is the “fun zone” where a lot of Spector users tend to run their basses to get that sound. EQ in this range is often referred to as being “dimed.”
Stomp the button to toggle the unit OFF and ON.
If the LED is ON, the HAZard LAMPS is doing its thing. 

Edited Wednesday at 11:29 by patrikmarky