FS: Epifani UL Series 2 4x10 Cab + SWR SM500 Amp Head £650

[timloudon]

Combined Price: £650

[b]Edit:[/b] User ebenezer has kindlt pointed out that this is the Series 2 cab, with [color=#282828][font=helvetica, arial, sans-serif]eminence deltalite speakers. Apologies for any confusion, I've had it so long I didn't realise it was Series 2.[/font][/color]

----

It's time to sell this absolute beast of a rig. I'm downsizing, since I live in a small flat and don't need this power for the work that I do.

This cab is amazing. Its super light-weight and super powerful. It has easily catered for every type of stage I've played on and just delivers on tone and clarity. I purchased it around 10 years ago from The Bass Gallery, brand new. The cab has seen some use and has no defects or damage, just normal cosmetic wear and tear. It is the 4ohm version.

The amp is included as a kind of extra for a few reasons. I purchased this amp for an extremely low price at the time - the reason it was so cheap is because it is missing a capacitor on what I believe is the power regulator board (which I did not know), and also has a part loose on the inside. This has had very little effect on performance for the years I've used it, but since I need to clear space it has to go too. It would be a great project for someone who fancies soldering on a capacitor. It comes in this Aguilar 2U case (heavily used condition) with kettle lead and a nice long Speakon cable.

Specs for both included below.

I'm based in North London and would prefer collection. I'm not keen on shipping such a large item, however there's a possibility I can drop the items on the way to a gig outside London, depending on location.

I would consider selling them separately but will need to check that I'm following the rules of the forum properly!

Any questions then please do let me know.

Thanks,

Tim

[attachment=248806:Cab 1.jpeg]
[attachment=248807:Cab 2.jpeg]
[attachment=248808:Cab 3.jpeg]
[attachment=248809:Cab 4.jpeg]
[attachment=248810:Cab 5.jpeg]
[attachment=248811:Amp 1.jpeg]
[attachment=248812:Amp 2.jpeg]
[attachment=248813:Amp 3.jpeg]
[attachment=248814:Amp 4.jpeg]

---

[b]Tech Specs[/b]

Cab:

[color=#282828][font=helvetica, arial, sans-serif]4 x 10" [s]250W B&C Neo Drivers[/s] E[/font][/color][color=#282828][font=helvetica, arial, sans-serif]minence Deltalite[/font][/color]
[color=#282828][font=helvetica, arial, sans-serif]100 Watt Bullet Tweeter [/font][/color]
[color=#282828][font=helvetica, arial, sans-serif]Adjustable Tweeter Level Control[/font][/color]
[color=#282828][font=helvetica, arial, sans-serif]Impedance: 4[/font][/color][color=#282828][font=helvetica, arial, sans-serif] Ohms[/font][/color]
[color=#282828][font=helvetica, arial, sans-serif]Power: [/font][/color][color=#282828][font=helvetica, arial, sans-serif]1000 WRMS ([/font][/color][color=#282828][font=helvetica, arial, sans-serif]2400 Watt Peak)[/font][/color]
[color=#282828][font=helvetica, arial, sans-serif]Response 40Hz - 16kHz [/font][/color]
[color=#282828][font=helvetica, arial, sans-serif]Sensitivity 103dB (1W@1m) [/font][/color]
[color=#282828][font=helvetica, arial, sans-serif]2 x Speakon + 1/4" Output Connectors[/font][/color]
[color=#282828][font=helvetica, arial, sans-serif]26.25"H x 23"W x 17.75"D, or, 670mm H x 585mm W x 450mm D[/font][/color]
[color=#282828][font=helvetica, arial, sans-serif]28kg[/font][/color]

[color=#282828][font=helvetica, arial, sans-serif]Amp:[/font][/color]

[color=#282828][font=helvetica, arial, sans-serif]Output: [/font][/color]500W @ 4Ω (Bridge Mode); 250W @ 4Ω per channel (Stereo Mode) 400W @ 8Ω (Bridge Mode); 150W @ 8Ω per channel (Stereo Mode)
HEIGHT: 3.5 in (8.9 cm) WIDTH: 19 in (48.3 cm) DEPTH: 13.75 in (34.9 cm)
WEIGHT: 11.25kg

Edited July 18, 2017 by timloudon