Details about Ampeg SVT-3 PRO Bass Amp and Ampeg 2x10 Classic Cab £550

[JamesTun]

Offered is a USA Ampeg SVT 3 PRO Head and Ampeg 2x10" Classic Cab.

The head is mounted in a flight case. There are a few things to mention re the head:

1. The extreme left graphic fader switch is missing - you can still change the setting with a thin piece of plastic but it needs replacing
2. The third from the left graphic switch has lost its plastic cover
3. The main output has been changed to bare wires but it is supplied with a bare lead connected to Speakon lead which is what links it to the cab Fantastic sound but we need to downsize so will be swapping for something smaller. Have guessed at the courier cost but will pack and charge at cost to UK only. Collection preferable.

Specification:

[b]RMS Power Output (8 Ohms):[/b] 275-Watts
[b]RMS Power Output (4 Ohms):[/b] 450-Watts
[b]Preamp:[/b] Tubes (3 x 12AX7)
[b]Driver Tubes:[/b] 1 x 12AX7, 1 x 12AU7
[b]Power Amp:[/b] Solid-State
[b]Tone Controls:[/b] 3-Band
[b]Mid Tone Control:[/b] 5-Position
[b]Graphic EQ:[/b] Yes, 9-Band
[b]Ultra Low/High Boosts:[/b] Yes
[b]Balanced Line Out:[/b] Yes, Pre/Post with Ground Lift and Level
[b]Effects Loop:[/b] Yes
[b]Preamp Out/Power Amp In:[/b] Yes
[b]Dimensions (W x H x D inches):[/b] 19 x 3.5 x 15.5
[b]Weight:[/b] 26 Pounds[b]RMS Power Output (8 Ohms):[/b] 275-Watts
[b]RMS Power Output (4 Ohms):[/b] 450-Watts
[b]Preamp:[/b] Tubes (3 x 12AX7)
[b]Driver Tubes:[/b] 1 x 12AX7, 1 x 12AU7
[b]Power Amp:[/b] Solid-State
[b]Tone Controls:[/b] 3-Band
[b]Mid Tone Control:[/b] 5-Position
[b]Graphic EQ:[/b] Yes, 9-Band
[b]Ultra Low/High Boosts:[/b] Yes
[b]Balanced Line Out:[/b] Yes, Pre/Post with Ground Lift and Level
[b]Effects Loop:[/b] Yes
[b]Preamp Out/Power Amp In:[/b] Yes
[b]Dimensions (W x H x D inches):[/b] 19 x 3.5 x 15.5
[b]Weight:[/b] 26 Pounds

Edited April 16, 2017 by JamesTun