hubo Posted May 12, 2014 Share Posted May 12, 2014 All, I have recently picked up an AH250 (GP11 MK.V) in pretty good condition except the 2 switches used to activate the 2 presets (Graphic eq. and Middle cut pre-shaping) that dont work at all. The 2 switches are dead in the sense that the tiny bit that creates a contact between the switch poles at the tip of the white plastic part has completly gone. I can live like this, as the presets can be activated with the footswitch but I would like to fix this. Anyone would know where I could find standard replacement parts for those switches or an alternative that can accomodate the green buttons? Thanks! H Quote Link to comment Share on other sites More sharing options...
Subthumper Posted May 24, 2014 Share Posted May 24, 2014 I just repaired an old gp7 with the same problem. Maplins do a range of Flat push to make switches that are a pretty good match for the originals. Needs the whole front dismantling to get to them and a bit of creative soldering to m make them fit. If you can't solder get it done by a tech. Quote Link to comment Share on other sites More sharing options...
Subthumper Posted May 24, 2014 Share Posted May 24, 2014 Btw the switch button will need some carefully drilling to get the shaft to fit the back properly. Quote Link to comment Share on other sites More sharing options...
.gif.9ad672bb8b84505709f76b39c8c256ec.gif)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.