2 Way Tone

[AngelLaHash]

Just thinking out here,
B1M Ohm Pot, opened up and SLICED down the middle so got two sides of a B500K
One side can have 47nF and the other side say 100nF then to earth with the both of them
the Middle is the Input for the Tone Controls
<Dont know if it would work on a A1M as i think its two resistance inner ring and a outter ring>

Making two Tone Controls, instead of going 0-10, its 0-5 and 5-10
So 0-5 is the range for the 47nF and 5-10 is the range for the 100nF
As you cross over it goes to the MAX 500K and down on ever said
as it is a B1M it should be Liner

Well going to try it out in the morning with a 2p2t switch
To give me a mix of 104/49 , 22/10 and 47/22
Values 82/39 , 22/10 and 25/12
If it works'so want to call it the angel split


XXX

Edited May 29, 2013 by AngelLaHash