StevieD_FenderP2009 Posted April 22, 2012 Share Posted April 22, 2012 (edited) [s]Hey guys I'm after an Aguilar OBP-3 pre amp for my Tobias so I'm taking out the Dave McKeen pre amp that's in it and selling it. The lay out for the pre amp is Bass/Treble stacked pot, mid pot with mid selector 3 way switch, blend and volume. It has a lot of bottom end and a lot of mids to it but the top end seems to lack a little bit for what I like. It's a beautiful slap tone on it and you can get a really deep finger style tone out of it. It does suit the bass really nicely but it doesn't suit me if you know what I mean? haha. The mid selector switch on it works really well and you can definitely notice a big difference when you change which section of the mids you want to boost or roll off. Basically, my understanding of it is that when the mids pot is in the center, it's flat so that when you roll it back or forward, it boosts or cuts the mids. Same with the treble and bass stacked knob. I'll be sending the pre amp with all the pots attached and the barrel jack connected. It's up to you what ones you do use and what ones you don't. I've had no issues from it since I got it. Oh, I'll also be supplying a wiring diagram with it (either digital or hard copy, your choice). It's pretty much just a case that I've always known what I wanted in my bass but couldn't afford it before and didn't have the time to wait for one to arrive from America (i needed a pre amp quickly as the old one in my Tobias gave up the will to live and i had a gig coming up that I needed to use that bass for as it was my only gigging bass at the time) so yeah, now I can afford what I want, I am going to get it. Simple as that. So yeah, the price I'm looking for is £50 plus £3 postage. Absolute bargain for this I think especially as all the pots are brand new and it comes with a proper barrel jack input. If pictures are needed, i'll upload some. Cheers Stevie[/s] SOOOOOOLD! STOP LOOKING, GO AWAY! THIS IS NO MORE! Edited September 19, 2012 by StevieD_FenderP2009 Link to comment Share on other sites More sharing options...
StevieD_FenderP2009 Posted April 26, 2012 Author Share Posted April 26, 2012 Bump Link to comment Share on other sites More sharing options...
captain black Posted April 27, 2012 Share Posted April 27, 2012 Steve, Can you confirm that this only requires 4 holes? Even better would you have a photo? If so I may be interested in using it to replace the tonepump in my spector. Joe Link to comment Share on other sites More sharing options...
StevieD_FenderP2009 Posted April 28, 2012 Author Share Posted April 28, 2012 It's a 4 pot pre amp but does have a mid selector switch as mentioned in the OP so unless you just leave the mid switch in the control cavity or un-wire it completely so it bypasses the switch and leaves the actual mids to be controlled by the mid pot only (which is easy to do as I looked in to it). And anyway, bump! Link to comment Share on other sites More sharing options...
StevieD_FenderP2009 Posted April 29, 2012 Author Share Posted April 29, 2012 Bump Link to comment Share on other sites More sharing options...
StevieD_FenderP2009 Posted April 30, 2012 Author Share Posted April 30, 2012 buuump Link to comment Share on other sites More sharing options...
StevieD_FenderP2009 Posted May 5, 2012 Author Share Posted May 5, 2012 Don't stop at the top... Link to comment Share on other sites More sharing options...
captain black Posted June 25, 2012 Share Posted June 25, 2012 Pmd again. Link to comment Share on other sites More sharing options...
StevieD_FenderP2009 Posted September 11, 2012 Author Share Posted September 11, 2012 Back up for sale again! I got an Aguilar OBP-3 as a present so this is redundant. £50 plus £3 postage! Link to comment Share on other sites More sharing options...
StevieD_FenderP2009 Posted September 12, 2012 Author Share Posted September 12, 2012 Anyone interested in this? Link to comment Share on other sites More sharing options...
Recommended Posts