Jump to content
Why become a member? ×

TheBishop

Member
  • Posts

    12
  • Joined

  • Last visited

Posts posted by TheBishop

  1. Thanks folks. I'm not sure what will happen when the sticky tape comes off! We'll see when i give it a go!
    If I replace the pick plate I'll be looking for an exact replacement. I think I'm right that this is the same as the '62 p-bass. Thanks for the offers!

    I definitely think there is a lot of setting up to do but I'm most nervous about trus rod adjustments. It's adjusted from the base not the neck so is a bit awkward. I'll need to get some measuring tools I guess.

    I'll post pics of the work when I start fixing things.

  2. Hi folks,

    I'm posting this here after doing an introduction [url="http://basschat.co.uk/topic/229880-just-joined-sayin-hi-advice-needed-for-cleanup-of-fender-jv-bass/"]here[/url]

    Basically I've dug out my old bass from the attic after some 15-17 years. It's a Fender JV P-Bass. S/N JV07xxxx.

    It's actually in pretty good shape and even after that time it was still in tune! ok. The strings were pretty buggered but that can easily be fixed. However there are a few things I'd like to get done so looking for advice.

    You can view the bass pics [url="https://www.dropbox.com/sh/w1lac1jzl99hmxx/7DGiT2TcBO/"]here[/url] (I tried linking directly to dropbox but I can't get it to work).. will try attaching too...

    The main issues are:

    1. Pick plate is warped (Its been suggested that I warm it up while sandwiched between two heavy things....).

    2. Chrome-work is not great, the bridge is particularly yuk. Soaking in coke has been suggested.

    3.The chrome on the knobs is coming off and I don't think they can be repaired so new ones needed.

    4. One of the tuning heads is damaged and held together with sticky tape.

    5. Jack socket is mucho crackly... I'm hoping it can be cleaned. Need suggestions for cleaning it.

    6. Action needs tweaking, but buzzy on some strings. Advice on where to look for getting a good setup appreciated.



    If the pick plate can't be de warped can I just replace it? Is it possible to get a replacement. As far as I can tell it's exactly the same spec as the '62 original.

    If the chrome is worn/damaged then should I attempt to replace the bridge or keep original?

    The tuning heads look to be quite specific. They are similar to the '62 but are different. Should I replace them or make do?

    Should I get new electrics/pickups or keep as much of the original as possible?

    Advice appreciated.

    [attachment=155466:20140216-FenderJV001.jpg][attachment=155467:20140216-FenderJV002.jpg][attachment=155468:20140216-FenderJV004.jpg][attachment=155469:20140216-FenderJV005.jpg][attachment=155470:20140216-FenderJV007.jpg][attachment=155471:20140216-FenderJV008.jpg][attachment=155472:20140216-FenderJV009.jpg][attachment=155473:20140216-FenderJV010.jpg][attachment=155474:20140216-FenderJV012.jpg][attachment=155475:20140216-FenderJV013.jpg][attachment=155476:20140216-FenderJV015.jpg][attachment=155477:20140216-FenderJV017.jpg]

×
×
  • Create New...