JwK94

Sounds great, sent you an email!

Long name I know, but essentially an acoustic preamp in a convenient stompbox format. With switches for mute and the sonic maximizer section. Controls for frequency response, gain, treble, mid, bass, notch level and frequency, lo contour, process, and volume.

Handy Frequency and Notch controls to help isolate and eliminate feedback. And the sonic maximiser section (Process +LD Contour) to further help you get the best tone.

Very good build quality, sturdy unit. Can get the best out of any acoustic instrument, I’ve used it for both Acoustic Guitar and Upright Bass and it does the job well, i’m sure it could work for Violins/Mandolins etc also. 

Runs off of 12v AC (power supply will be included)

Can post from The Netherlands, or alternatively will be in the UK (Leicestershire) towards the end of April if you want to try/collect or have it posted from there.

Cheers,

Jack

Real classic here, we all know what this one does. Great fuzz sounds and retains all that low end. Best value for money there is when it comes to fuzz pedals!

Not really using much fuzz sounds though and don’t have space on the board to use it unfortunately.

Can post from The Netherlands, or alternatively will be in the UK (Leicestershire) towards the end of April if you want to try/collect or have it posted from there.

Cheers,

Jack

Great reverb pedal, simple controls. All the sounds you could ask for and more.

Featuring the signature tone print of course, meaning you can design your own reverb with their tone print software and upload it to the pedal. But honestly I’ve always found what is already on this pedal enough! Also can be used in stereo as you see!

Using the HX Stomp for all time based fx nowadays, to save space. So this isn’t getting the use!

Runs off 9v.

Can post from The Netherlands, or alternatively will be in the UK (Leicestershire) towards the end of April if you want to try/collect or have it posted from there.

Cheers,

Jack

Classic EBS octaver, a real workhorse and easy to use. Range switch makes it easy to dial in a nice tone depending on what area of the fretboard you’re playing in. Tone knob is also very handy to shape, well, tone… 

Pedal board has had a big downsize and this just isn't getting the use anymore unfortunately. True bypass of course and runs off 9v 

Can post from The Netherlands, or alternatively will be in the UK (Leicestershire) towards the end of April if you want to try/collect or have it posted from there.

Another great piece of Darkglass Engineering, now discontinued. Old school compressor textures with a modern twist. Plenty of control over the sound and therefore very versatile. Can find the manual online with all the features/info. True bypass of course and runs off 9v 

Downsized my pedal board and unfortunately no room for this anymore.

Slight wear and tear on the housing but works perfectly!

Can post from The Netherlands, or alternatively will be in the UK (Leicestershire) towards the end of April if you want to try/collect or have it posted from there.

Cheers,

Jack

Fantastic tube drive from Darkglass, much more of a warm and vintage saturation that some of their other more modern sounding pedals, although with the ‘Era’ knob you can get a good modern drive sound too! Downsized my pedal board and unfortunately no room for this anymore.

The housing has a bit of wear and tear through use, but working just as it should. Velcro on bottom as shown.

True bypass of course and runs off 9v

Can post from The Netherlands, or alternatively will be in the UK (Leicestershire) towards the end of April if you want to try/collect or have it posted from there.

Cheers,

Jack

A bit of Matt Ramsey's playing with Kirk Franklin, the guy is a monster

PM Sent! 

Three on E, walk up and down, 'nuff said

This still available?

Cheers it certainly is!

.

NOW SOLD.

Yeah I added it in via edit 😅

Thanks!

4.2kg

Thanks for reminding me, totally forgot to add it to the description

Hi All,

Having to sell my BassMods k434 as I'm moving abroad unfortunately don't have room for this bass.

I bought this bass new direct from Bass Mods in the US in about 2018, it's been a trusty companion so hopefully it can find a good home!

The bass itself is fantastic, it's about as versatile as a bass can get, besides not having 5 strings. But it does have a Hipshot D'Tuner for some extra range! I'll drop all the specs below.

Tone-wise it has it all, the Bartolini pickups are great, relatively hot and modern sounding. But it's the preamp that really sets this one apart, it's a custom BassMods preamp with just about all the options you could want: A stacked Volume/Tone knob, pickup blend, active/passive switch and Bass,Treble and Mid controls (the Mid knob is also a pull switch for treble/slap boost).

So you can just about get any sound you want out of this bass. 

There are a couple of small dings, general wear and tear, as pictured below.

Specs.

Body: Alder with Flamed maple top (in Tobacco Burst)

Neck: Maple, Rosewood Fingerboard w/ Abalone inlays

Pickups: Bartolini B-Axis PJ Set (PB4 + J44J-L)

Preamp: Bass Mods -34PTPB 18v - 1.Vol/Passive tone 2.Blend 3.Mid/Pull bright 4.Stacked Treble/Bass -Act-Pass Mini switch

Tuners: Hipshot Ultralight (x3) plus Hipshot Ultralight Bass Xtender

Bridge: BassMods High Mass (19mm)

Scale: 34"

Weight: 4.2kg

Also comes with Dunlop Straplok (Inner parts not photographed but will be included)

£600 ono

So it's plenty of bass for the money. Please don't hesitate to get in touch if you have any more questions, I understand it's hard to find too much info on these as they don't make too many of them. 

Collection from Leicester would be ideal but can of course ship at buyers expense! Case-wise I'll throw in a Sandberg gig bag if collection, and if shipping I'll send it in a generic (throroughly used) hard case for protection. 

Thanks,

Jack 

PM'd

Hi All,

Selling my Markbass SuperSynth pedal, unfortunately it doesn't get the use it deserves and i'm downsizing my pedalboard! 

Fantastic pedal with great synth and octaver sounds (functions as either), and with the Markbasss Synth/Octaver software on their website you can hook this pedal up to your computer and programme your own sounds onto it! 

Here are some specs from markbass: http://www.markbass.it/product-detail/super-synth-discontinued/

£100 ono. 

Happy to post the item!

Price Reduced to £200! 

Yeah still available! 

ON HOLD

Hi All,

Up for sale is my Bitsa P-Bass, made this a few years ago after grabbing various parts/spares here and there, and it came out great! Sounds great and plays well too! Having to sell as I got a Bassmods PJ recently so don't really use this one anymore.

Most of the parts aren't anything too special, but all solid and reliable. The body I beleive is from a Squier, as is the bridge/tuners. I'm not sure about the origin of the Neck but its Maple/Maple with a Lacquered Finish on the fingerboard and Satin finish on the back of the neck! Now to the electronics, where I splashed out. The wiring loom is KiOgon's Solderless package (super easy to change pickups) and the pickup is of course a Seymour Duncan SPB-1 Vintage, which has a great vintage sound and really makes this bass come alive!

Other than that it could probably do with a set up/new strings, but its a lot of quality bass for the price! I'll throw in the case as well for free if you want it, it's seen better days but the clasps/handle all still work!

Pickup from Wigston, Leicestershire, or I could look into postage at your expense.

Thanks,

Jack

Hi,

Selling my Shcroeder 110 Cab here, unfortunately it doesnt get used as much as it should (accidentally became a guitar player) and I need to reduce my collection a little.

This is honestly a great little cabinet, ridiculously light and packs a punch. I've used it alone with my Aguilar TH350 and its been more than enough for small bar gigs etc. Tolex is peeling a little in a few places (as seen in photos) so I've knocked a bit off the price for that. These are ~£450  new so get yourself a real bargain.

Specs are as follows:

Drivers: One Custom Neodymium Woofer

Tweeter: 150 Watts Bullet Tweeter

Inputs: Dual Speakon In/Out

Frequency Response: 40 Hz - 18 kHz

Impedance: 8 Ohm

Watts: 350 Watts Rms

Max Decibels: 103 dB Spl@ 1W/1M

Weight: 20 lbs. (9 Kg.)

Dimensions: 17”W x 13”H x 15”D

Collection from Wigston, Leicestershire preffered but can look into Postage at buyers expense if Necessarry

Cheers!

Jack

Hi All,

Selling my Tecamp XS 110 Cabinet! It hasn't been getting the use it deserves and I unfortunately need to downsize my collection, so grab yourself a bargain as I paid a fair bit more for it!

Specs as follows:

• Neodym-Speakers:

• Our custom designed speakers deliver unparalleled fast response, massive power handling and a premium tone.

• Configuration:

• 1 x 10"

• Power RMS:

• 300 w

• Horn:

• 1" NTW1 horn with tweeter switching system

• Sensitivity:

• 99 dB

• Freq. Response:

• 45-19.000 Hz

• Impedance:

• 4 ohms or 8 ohms

• Connections:

• 2 x Neutrik Speakon® parallel

• Dimensions (W x H x D):

• 44 x 38 x 35 cm;

• 17" x 15" x 14"

• Weight:

• 9 kg / 20 lbs

Take not of that last spec, only 9kg! This thing is seriously light and super portable! And really powerful for its size and weight. Also you'll see it comes with a metal rod that slots in to a groove in the back so you can tilt it back, real handy.

So grab yourself a real bargain on this one!

Collection from Wigston, Leicestershire preffered but could potentially organise postage at buyers expense.

Thanks! 

Jack

Literally all the ibanez SR ones, I wont even buy one because I can't stand the headstock.

Let me know then guys. Starting a cruise contract in 2 weeks and need it gone before then ideally.