I have placed this Bitsa build here as I don't feel it warrants a place in Build Diaries as it is basically an "Assembly" with a bit of body finishing.
I wanted a Year of Birth Bass but not a '51 P slab so I thought of a '54 P contoured body with a minimalist Pup and control panel with no pickguard or Pup covers, so here's how it went.
Last year I bought a really lovely '51 P neck off a Chinese seller on Flea Bay. It had a Jazz width bound neck with block MoP inlays. Over the followin
To be honest Si, the standard of sanding finish from Guitar Build is very good indeed. I didn't do any further sanding as I wanted an "organic" feel to the finish and mahogany has quite a tight grain structure . Tru oil is very easy to use, I didn't use the "wet' n dry" slurry system that @honza992 & @Andyjr1515 I just applied numerous coats with a microfiber cloth. The Tru oil is very tough when fully dried, I left it to harden for a week before any assembly. One small bottle of Tru oil did