Jump to content
Why become a member? ×

ROQSOLID AMP AND CAB COVERS


MB1
 Share

Recommended Posts

MB1. :)
Very Happy with these so i thought id pass it on!...
I have just purchased some Covers for my Amp and Cab from Roqsolid and the Quality of these Covers is Exceptional. There Service is Second to none,and i am led to believe they are capable of making Specialist Covers for just about anything!.All Covers are Fully Guaranteed and very well made.. Far superior than many offered by the amplification manufacturers.Very Quick Service and a pleasure to deal with!..
Many Thanks To Brynn and all the Roqsolid Team.
Martin.

Roqsolid Contact Brynn 07748155864.
Unit 9
Carr Mills Business Centre www.roqsolid.co.uk
919 Bradford Road
Birstall
West Yorkshire
WF17 9JX.

Link to comment
Share on other sites

+1 from me, yep, totally agree. Have one for my 610 and its protected it splendidly, even has a little hole for the towel rail to pop out of so you can move it about nicely.... as below!

[attachment=53632:610covered.jpg]

Link to comment
Share on other sites

  • 4 months later...

Ordered one for my Barefaced Super Twelve T. Arrived very quickly, the fit is perfect and the quality is just superb. Very, very highly recommended. A few photos:

The cab covered over



Corner detail showing the binding



Handle cut-out detail



The rear of the cover has the bottom edge raised to clear the wheels - nice touch.



And lastly the felt lining

Link to comment
Share on other sites

Got one for my Midget.

Well stitched, but the slot for the handle is out by several inches lengthwise, meaning the slot corners are getting noticeably strained. I think they'll tear before long. :)

To be fair, I haven't complained to the company, on the grounds that postage is prohibitive for something like this.

Link to comment
Share on other sites

[quote name='BassBod' post='1038958' date='Nov 27 2010, 04:48 PM']I recently got one for my Midget and thought the handle slot was in the wrong place....then I realized the handle isn't isn't in the middle of the cab. Turned the cover around and it was a perfect fit. Worth checking?[/quote]

Blimey! Never thought of that. :)

Just checked. You're right, of course. Glad now I didn;t complain. What an ar*e I'd have looked.

Strangely, defying all the laws of probability, I must have fitted that cover the wrong way round every single time I used it. :)

Sorry, Mr. Roqsolid guys, if you're reading this :lol:

Edited by fatback
Link to comment
Share on other sites

  • 4 weeks later...

MB1. :)
And again!,Great Superfast ,No Hassle Service and Impeccable Quality from Bryn and all the ROQSOLID team!
A quick phone call and a couple of days wait and the covers in the post!
Buy With Confidence!
Great Stuff!
All The Best!
Martin.

Link to comment
Share on other sites

  • 4 weeks later...

I sent in the dimensions for my Laney NX115 cab on Sunday, got a reply on Monday saying that they had taken the measurements and it was on their website to order, ordered it on Monday late afternoon and it arrived on Friday morning.

Perfect as usual - this is the third time I've ordered from them and the third time that they did not have my cab dimensions on their system so had to submit them myself but they were quick to get them up and quick to process the order.

Edited by Delberthot
Link to comment
Share on other sites

  • 3 weeks later...

Ordered a cover for my Ampeg SVT 210HE cab (a discontinued model) on Saturday.Thought as the cab was discontinued it may take a while. Turned up today.

On the site they advise 10 - 14 days, this was 3 working days to get here, great service. Cover looks good, am at work so don`t know if it fits yet. Went for just the cover without the padding, so was £23ish, as oppose to £30+. Have previously had covers by Marshall, and this cover is far better quality, looks to be very hardwearing.

If it fits, I`ll have to state great service & product from Roqsolid. It fits, so I`m very happy with Roqsolid all round.

Edited by Lozz196
Link to comment
Share on other sites

  • 3 weeks later...
  • 2 months later...

Ordered a cover for my Eden Nemesis N410RS cab last weekend. The cab wasn`t shown on the website as one of the cabs they already have details for, so I went throught the "choose your cab" section, sending off the measurements etc. This feature was very good by the way, nice and easy to use.

The site shows 10 - 14 days turnaround time. My cover was delivered on Friday, so turnaround time of 5 working days - and this for a cab for which they didn`t already have the specs.

Fits perfectly by the way, nice and hard wearing, will stop the cab rattling around too much in the back of the car on the way to rehearsals.

Simply great service again from Roqsolid.

Link to comment
Share on other sites

  • 3 weeks later...

+1 for Roqsolid.

I ordered a cover for a Barefaced Midget online last Sunday evening… come Thursday, it was at the door. Amazingly good turnaround! :)

Though p'raps not [i]quite[/i] as thickly padded as I'd hoped, it's really toughly made, and perfect in terms of size.

I asked for the baffle board-pocket option (the cab being cloth-grilled) and was relieved that Roqsolid got it on the correct side (as noted above, the Midget has an off-centre carry-handle).

Actually with a thin board inserted in place the handle opening is pulled just a few mm's off-centre… and I'd say the size of the handle opening could do with being a tad more generous anyway… but it's no problem.

Overall... recommended.

Link to comment
Share on other sites

I'll add to the love for Roqsolid!
I have an unusual cab - an Earcandy Sweet tooth 2x10, and was not surprised that it didn't appear on their list. I used their template to submit the dimensions and got a quote back the next working day. I ordered and prayed that I had measured correctly.
It came pretty quickly and fits like a glove with the handles perfectly aligned. I went for the option of a strip to go under the belly of the cab so it would be more secure, which works well. The material is thin but tough. These covers don't look too classy, but who cares?
Overall, they were cheaper and had better customer service than the other company I approached for a quote. Highly recommended.

Link to comment
Share on other sites

  • 5 months later...

Another very postive experience
- ordered a custom cover for a Deltabass 300 combo and a "standard" for Aguilar GS112 cab - communications couldn't have been more helpful or friendlier, and the on-line dimensions submission form for custom covers is a cinch. Both covers arrived within days, great fit and construction - really impressed.
Did I say they smell nice too?

Link to comment
Share on other sites

I ordered one of these for my ACME 12" cab. They had not made one before, so I did the measurements. I hate doing measurements cos I always get them wrong. I did. They emailed me to tell me that they were wrong because they did not add up. I re-measured and then they worked. They made me a great cover. I am happy.

Link to comment
Share on other sites

  • 1 month later...
  • 3 weeks later...
  • 3 months later...
  • 3 months later...

MB1. B)
Nearly Two years down the line from my original post and im happy to report...
Roqsolid Covers are still offering Great Quality Service and an all round Custom Cover service that i have personally found second to none.Price,quality,customer service and turnaround time are excellent as are the covers.Bryn and the Roqsolid team can custom make covers for just about any gear you need a cover for! ...I wouldnt go anywhere else!
Many Thanks Again!
Martin.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...