Jump to content
Why become a member? ×

DIY Effects


JackLondon

Recommended Posts

[quote name='Sibob' timestamp='1424341417' post='2695248']
Built a quick EM-Drive clone for a friend, Fuzz Dog PCB, nice and easy, sounds fine (for a light guitar Overdrive). Stencilled a Bear on it.......cos he likes Bears mainly:
Si
[/quote]

C'mon..... let's see inside! :P

Link to comment
Share on other sites

I forgot to take a photo and my mate has it now :(
Was fairly tidy, ever since I discovered solid core cables.....changed my world. There's a few posts within this thread where I have some guts pictures from my Poultone Boosts etc, nice and neat :)

Edit:
Here's one of my boosts, the Em-Drive had one more board-mount pot, but actually fewer components. Same cabling fundamentally though:

[IMG]http://i61.tinypic.com/2r7mu7c.png[/IMG]

Si

Link to comment
Share on other sites

I need help, I've gone and stirred up a whole mess of my stupid. I'm asking in here because it's part of a PSU for pedals.

The problem: I am trying to wire up a neon power indicator and I can't get it to work. I know it works because if I wire it up straight to the mains, with nothing else connected, it works. But I am trying to go Mains ---- Fuse ---- Switch ---- Lamp ---- Circuit (which is empty right now). The most infuriating part is that when testing, I am getting 230v before the lamp but 130v after it. When touching the terminals with the multimeter the lamp will actually give a weak glow. I have tried wiring it in parallel, too, but that didn't work, either.

I am assuming and hoping that, because I have never tried installing one before, there is something about them that I have never needed to know before, and one of you fine gentlemen might be able to give me a clue.

This is the lamp: [url="http://www.bitsbox.co.uk/index.php?main_page=product_info&cPath=172_184&products_id=1398"]http://www.bitsbox.co.uk/index.php?main_page=product_info&cPath=172_184&products_id=1398[/url]

Link to comment
Share on other sites

I found this:

[i][color=#000000]A neon indicator lamp (and its series resistor) are wired in parallel with the appliance and indicate that the power is on. Once lit, it has an extremely high resistance and the current flowing through it is tiny. If you wire it in series with the appliance, the current flowing through both will be very small and nearly all of the voltage drop will be across the neon lamp.[/color][/i]

[color=#000000]....and found [url="http://www.intl-lighttech.com/applications/light-sources/neon-lamps"]this[/url] about series resistors for them.[/color]

[color=#000000]Hope this helps.[/color]

Link to comment
Share on other sites

[quote name='ColinB' timestamp='1424419409' post='2696042']
I found this:

[i][color=#000000]A neon indicator lamp (and its series resistor) are wired in parallel with the appliance and indicate that the power is on. Once lit, it has an extremely high resistance and the current flowing through it is tiny. If you wire it in series with the appliance, the current flowing through both will be very small and nearly all of the voltage drop will be across the neon lamp.[/color][/i]

[color=#000000]....and found [url="http://www.intl-lighttech.com/applications/light-sources/neon-lamps"]this[/url] about series resistors for them.[/color]

[color=#000000]Hope this helps.[/color]
[/quote]
This is what I ended up thinking, but it didn't work when I tried it in parallel. The unit already has a series resistor built into it.

Thanks for the link, it was interesting.

Link to comment
Share on other sites

[quote name='ColinB' timestamp='1424440722' post='2696334']
I decided to put my Madbean Afterlife into a 1950a enclosure. I replaced the Ghostnote mod with the original resister as that's where I'd found it to sound best anyway. I also tried to make a neater wiring job after seeing Si's work.....




[/quote]

Looking great, 1590a projects are so satisfying when they come off lol

Si

Link to comment
Share on other sites

  • 2 weeks later...

Pardon me if I'm stretching the definition of effects a little bit. This is an in-progress pic of my current bass preamp/DI build:



I'm just about to order the permanent front panel, which will look a lot like this, in blue anodized aluminium:



There's a TalkBass build thread [url="http://www.talkbass.com/threads/a-diy-1-2-rack-bass-preamp.1135423/#post-16982343"]here[/url] as well, but I would be perfectly happy to discuss details in this thread if desired.

Link to comment
Share on other sites

[quote name='bartelby' timestamp='1425470588' post='2707608']
Tidying up my parts box I found 10 LM308Ns,10 RC4558s and 3 555 timers...

What to make??
[/quote]

Definitely a RAT with the 308s. I made one of these, but using a 741 (so took out the compensating cap across pins 1 and 8) a while ago.

http://tagboardeffects.blogspot.co.uk/2014/07/idiotbox-blowerbox.html

Well worth building - nice and gnarly!

Link to comment
Share on other sites

[quote name='Bottle' timestamp='1426112296' post='2714668']
Oh, that's mighty purty :)
[/quote]

Thanks. It actually sounds pretty nice too, always a bit of a crapshoot when doing my own design. Here's the matching power amp:



700 watts @ 4 ohms, 7.5 pounds. The two modules will be able to fit side by side in a 19" rack once the new front panels get done, or can be stacked vertically for use with smaller cabs.

Link to comment
Share on other sites

  • 2 weeks later...

[quote name='Wooks79' timestamp='1424199020' post='2693787']
Is there anyone on here fancies looking at a Fuzzrocious Dark Driving that doesn't seem to be playing right for me please?
[/quote]

I had one of these and the transistor was socketed but very loosely and it would occasionally cut out until I secured it with tape. If yours is playing up I'd check for a dodgy connection there!

Link to comment
Share on other sites

  • Rich pinned this topic

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...