Jump to content
Why become a member? Read more... ×
loudandclear

Feedback for KiOgon

Recommended Posts

Just finished upgrading a CIJ P-bass with a wiring loom from John. Quality work, lightning turnaround, and the little screwdriver was more useful than I thought it might be for securing the solderless connections! John hardly needs me to recommend him on page 12 of his feedback thread, but I heartily do so anyway!

Share this post


Link to post
Share on other sites

Replaced my Roadworn P wiring with a kit from John, beautiful work once again, Sprague pacer 0.1uf cap, lushness!

Share this post


Link to post
Share on other sites

[quote name='LewisK1975' timestamp='1474628187' post='3139353']
Replaced my Roadworn P wiring with a kit from John, beautiful work once again, Sprague pacer 0.1uf cap, lushness!
[/quote]

Had the man himself replace my Road Worn P innards, I also have a Sprague Pacer 0.1uf cap and it is indeed lush!! :D

Share this post


Link to post
Share on other sites

Just replaced my P bass wiring with a kit from John, it really is the dogs dingly dangly bits and John is a good guy to deal with.

Share this post


Link to post
Share on other sites

Received another brilliant wiring kit for my Aria Elite, once again a top notch job and John is very helpful and gives sound advice. Best man out there for the Job and my Aria now sings as it should. B)

Thanks John

Share this post


Link to post
Share on other sites

Just had my JD short scale P set up & new loom fitted by John after seeing the feedback on here. It's now way better. Excellent, friendly & patient service & very reasonable price. Oh & a bag of homegrown chillies thrown in too!!! Top bloke to deal with.

Share this post


Link to post
Share on other sites

John built a custom loom for my 5 string jazz. He helped me every step of the way about options and how it would work up to instalation and help afterwards. His work is fantastic and he is very willing to help get you the right setup. Thanks again. My bass sounds great now :)

Share this post


Link to post
Share on other sites

Just got another P loom with a super quiet kill switch and as usual it works perfectly. John's wirework is expertly crafted and likely to last me out never mind the bass! B)

Thanks very much John.
Peace.

Tom.

Share this post


Link to post
Share on other sites

Another perfect loom from John (PJ this time) .....as always spot on in every way . All my basses have benefited from John looms and future ones always will :-) cheers

Share this post


Link to post
Share on other sites

Another lightning fast turnaround by John - just fitted a P loom in readiness for tonight's gig - as many have said before top quality workmanship and friendly service. Many thanks John.😁

Share this post


Link to post
Share on other sites

E Mailed John on the 20th December, ordered a loom for my Squier Jazz on the 22nd and received said loom on the 24th! Fantastic service.
I'll be ordering another one fairly soon.

Share this post


Link to post
Share on other sites

Bought a wiring harness (complete with new chrome knobs) from John to upgrade my Squier VM Precision V after it became apparent that the jack was more than a little dodgy.

Ordered Sunday evening, arrived Tuesday morning, fitted Tuesday evening. Came complete with instructions and even a tiny screwdriver. An absolute doddle to fit and the bass now sounds even better. Powerful tone with a far wider range of tones from full-off to full-on.

Very highly recommended. Many thanks again John 😀

Edited by Deedee

Share this post


Link to post
Share on other sites

First of two - recently bought a P-bass and a J-bass loom from John. Both arrived super quick but the P-bass one is still in the box because it's going into a Westfield and a little woodwork is required to get these nice chunky, quality pots to fit in the where the old cheap, nasty ones were (well, still are...), so that'll be my second review at some point.

Anyway... the J-bass loom - I bought the one with the series/parallel mod pull-pot on the tone switch. Wiring in was easy even for a complete electrical numpty like me - followed the instructions (now there's a thing...) and had everything nicely installed in about 10 minutes flat (even that's probably a bit slow...).

Plugged in, turned up and - bloddy hell it sounds good in my Squier CV Jazz. All the normal Jazz sounds but clearer and deeper, then with the pot pulled (oe-er)... I guess all i can say is you have to try it, not like anything I've had before - bassier, still got good top end and so smooth.

Next up is a passive loom for my newly acquired Sandberg TM4 - ideas being discussed but no hesitation at all about going to John for this - absolutely confident that what ever he comes up with is going to do the job.

Dealing with John is a pleasure as he's willing to chat about ideas and, more importantly knows what he's talking about and what he's doing.

Share this post


Link to post
Share on other sites

John has just made me an emergency jazz loom. It was in the post to me within 12 minutes, at least it seemed like that.

What a top bloke.

Edited by ead

Share this post


Link to post
Share on other sites

Finally got the P-bass loom fitted - superb quality and easy as anything to get installed. Thank you John :)

Share this post


Link to post
Share on other sites

John done me up a new loom for my faker and a great job he did, the best man for the Job in my opinion and Ive seen plenty of soldering looms in my time.

Thanks John
Brian

Share this post


Link to post
Share on other sites

Just bought a KiOgon loom and it couldn't have gone easier. The work is top-notch - every joint perfect, plus lovely touches like the siting of the cap, and soldering one of the grounds to the side of the volume pot. I could NEVER do it this neatly. Cheerz John!

Edited by KK Jale

Share this post


Link to post
Share on other sites

A new loom for my Squier Modified Vintage Fretless - a lovely bit of kit sent in record time to Berlin from John. The series/parallel switch is fantastic.

Share this post


Link to post
Share on other sites

Just bought a Volume-Blend-Tone for my new Jazz bass (NBD to follow :D). A bit of a change from a typical Jazz setup but exactly what I was looking for - the blend is 100% at both ends and 100%/100% in the centre position so no loss output. High speed delivery, quality components and clear instructions as usual from John. Can't recommend these looms highly enough - both my Fenders and the Squier have a KiOgon loom now and I'm definitely a happy customer :D

Share this post


Link to post
Share on other sites

John made me up a loom. Arrived amazingly fast and sounds superb! Top fella, deal without hesitation. He even answer all my stupid questions and didn't call me any names :-)!

Share this post


Link to post
Share on other sites

Ordered a P bass wiring kit from John on Sunday afternoon, it arrived first thing this morning (Tuesday). Great service and a tidy job. Thanks for your help John.

Jezza

Share this post


Link to post
Share on other sites

Ordered a P loom from John. Second time ive dealt with him and as usual a fast and effortless transaction. Thanks

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

×