Jump to content
Why become a member? ×

MXR M237 DC BRICK ™ POWER SUPPLY - *SOLD*
£60
Near Portsmouth


bumnote
 Share

Recommended Posts

This is a power supply for pedals giving 8x 9 volt supplies, and 2 x18volt., It is centre negative so should fit most pedals but always check. Its been unpacked but nevr used. My apologies I cant get all the items into the individual boxes so I will send them seperately but in the same parcel. Those folks in the factories must have nimble fingers.

 

https://www.jimdunlop.com/mxr-dc-brick-power-supply/
 

M237 DC BRICK ™
POWER SUPPLY
DESCRIPTION
• Powers eight 9V pedals and two
18V pedals all at once without
sacrificing signal integrity
• Features 8 red LEDs to clearly
indicate short-circuited pedals
• Includes AC adapter and all
necessary cables to connect
pedals to the unit
DIRECTIONS
• Connect included AC adapter
into the M237’s 18V IN jack.
• Plug the AC adapter into a
wall outlet; the blue power
LED will light.
• Connect up to eight pedals
requiring 9V power to the eight
9V OUT jacks using the included
barrel-to-barrel cables.
• Connect up to two pedals
requiring 18V power to the two
18V OUT jacks using the barrel-
to-barrel cables.
POWER
The DC Brick Power Supply
requires an 18V regulated power
supply rated at 2000 mA, with
5.5mm x 2.1mm positive barrel,
negative center plug. The included
power adapter can utilize a
wide range of wall power, from
100–240V at 47–63Hz. Comes with
switchable US/Japan, UK, EU, and
Australian plugs.
CONNECTION NOTES
• Included cables use industry
standard 5.5mm x 2.1mm
positive barrel, negative
center polarity plugs.
• Eight 9V outputs can handle
an average of 150 mA each,
or a total of 1200 mA in
any configuration.
• Two 18V outputs can handle
an average of 400 mA each,
or a total of 800 mA in any
configuration.
• All outputs may be used
simultaneously for a total
current output of up to 2000 mA.
• The M237 is not compatible with
positive ground pedals. Use
of positive ground pedals may
cause short circuiting.
CONTROLS
18V IN receives power from
18V DC Adapter
9V OUT jacks power eight 9V
pedals; RED LEDs indicate
short-circuited pedals
BLUE LED indicates whether
the M237 is powered
18V OUT jacks power two
18V p

 

IMG_4979.JPG

IMG_4980.JPG

IMG_4981.JPG

IMG_4984.JPG

IMG_4986.JPG

IMG_4989.JPG

IMG_4991.JPG

Link to comment
Share on other sites

  • 2 weeks later...
  • bumnote changed the title to MXR M237 DC BRICK ™ POWER SUPPLY SOLD
Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...