Jump to content
Why become a member? ×

Brooks TB-12. A twelve string Thunderbird


Basvarken
 Share

Recommended Posts

I have just completed the build of a new twelve string Thunderbird bass.


The entire build process is documented here:
https://www.enkoo.nl/brooks-tb-12.html
 

tb-12-wh-full-1500_orig.jpg


tb-12-wh-body-1500_orig.jpg

 

tb-12-wh-body-back-1500_orig.jpg


tb-12-wh-bridge-set-1500_orig.jpg


tb-12-wh-head-1500_orig.jpg


tb-12-wh-outputs-1500_orig.jpg


tb-12-wh-full-back-1500_orig.jpg


tb-12-wh-body-angle-1500_orig.jpg

 

tb-12-wh-body3-1500_orig.jpg

 

tb-12-wh-head-back2-1500_orig.jpg

 

tb-12-wh-body-back-angle-1500_orig.jpg


Brooks TB-12
- Mahogany body wings
- Nine ply Mahogany/Walnut set neck. Neck through
- Opaque white (blonde) high gloss finish
- Abalonoid binding
- Ebony fretboard
- Circle position dots
- Jumbo frets
- 34" scale
- Buffalo horn nut 
- Three ply black/white/black pickguard
- ETS twelve string brass bridge set
- Two spokewheel double action trussrods
- Carbon reinforcement strip in the neck
- Lace Alumitone Bass Bar in the neck position
- Lace Alumitone DeathBar in the bridge position
- Allparts  stacked pots (volume/tone volume/tone)
- Mullard capacitors
- MEC on-on switch for coil split (humbucker-single coil)
- Gotoh GB 350 lightweight bass tuners
- Gotoh Stealth ST 31 guitar tuners
- 2 x Pure Tone Multi Contact jack output
- d'Addario EXL 170 - 12  strings 
- Weight: 4.25 kg

Wiring was done by BQ Music.

 

 

 

Edited by Basvarken
pics don't show
  • Like 12
Link to comment
Share on other sites

Lovely work, Rob.

 

At one point I was thinking about getting Mike Lull to make me one of these, it's Jeff Ament's JAX-T4 bodied, with a Hamer Chapparel neck:

 

lull12-jpg.2019894

 

image-asset.gif

 

I loved the idea of an oversized body married with the Hamer neck...we did speak about it and I think that if I'd lived locally to the Lull workshop, I may have pulled the trigger, but the costs were getting out of hand; donor Hamer bass, the Lull build fees, shipping (Hamer to Seattle, finished bass to the UK), plus taxes.  We were certainly nudging £7.5K.

  • Like 1
Link to comment
Share on other sites

1 minute ago, binky_bass said:

Honestly, I prefer the look of the TB12 over the Ament's bass (just my opinion of course!) 

 

@Basvarken - out of interest, could you build a 6 string triple octave bass (18 string)?

I guess that is possible, yes. But the bridge and tailpiece would be a costly affair, since they'd have to be custom made.
But who on earth has hands that big and strong to play an 18 string bass?

My fingers have a hard time at 12 strings already!

In my defense: I'm not an experienced 12-string player (as you probably can tell by the sloppy playing in the video) 😉

Link to comment
Share on other sites

21 minutes ago, Basvarken said:

I guess that is possible, yes. But the bridge and tailpiece would be a costly affair, since they'd have to be custom made.
But who on earth has hands that big and strong to play an 18 string bass?

My fingers have a hard time at 12 strings already!

In my defense: I'm not an experienced 12-string player (as you probably can tell by the sloppy playing in the video) 😉

 

I think you need to have a look at some of @binky_bass basses!

Link to comment
Share on other sites

A 6 string triple octave would have a substantially narrower neck that Binky (below). Would definitely be interesting to see how a 6 string triple would look. Hipshot have made hardware for an 8 string triple (24 string) in the past, so I'd assume they could rustle up something for a 6er triple! 

 

Screenshot_20220207-105102_Gallery.thumb.jpg.33fccb74afb508959714c417274ca452.jpg

Link to comment
Share on other sites

The company that makes the bridge sets for the 12-string basses that I build, is ETS Hardware from Germany.
They made a bridge set for a 24-string bass. So I guess anything is possible. 🤪

One of the most ridiculous bass guitars I have ever seen in my life, actually...

image.jpg?id=25763529&width=1182&quality

image.jpg?id=25763530&width=1182&quality
 

 

Edited by Basvarken
  • Like 1
Link to comment
Share on other sites

Just now, Basvarken said:

The company that makes the bridge sets for the 12-string basses that I build, is ETS Hardware from Germany.
They made a bridge set for a 24-string bass. So I guess anything is possible. 🤪

One of the most ridiculous bass guitars I have ever seen in my life, actually...

image.jpg?id=25763529&width=1182&quality

image.jpg?id=25763530&width=1182&quality

Yes, that's the bass I mean! I thought it was Hipshot but you are right, it is ETS. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...