Jump to content
Why become a member? ×

SOLD - Becos Compiq Stella Pro Compressor Pedal
£199
Lincolnshire


OriginalGBass
 Share

Recommended Posts

Used for recording only, great compressor, actually widely regarded as one of the best in pedal format, very versatile little unit, have a read here on Basschat for other user opinions!

No longer shipping to the UK, only available through Japanese or US vendors. 

 

Any questions please feel free to get in touch. Free UK Postage, tracked and signed for.

 

Read stellar reviews here on the website: https://becosfx.com/product/compiq-pro-stella-compressor-pedal-for-guitar-bass/

 

STUDIO-LEVEL AUDIO PERFORMANCE IN A PEDAL FORMAT

The CompIQ STELLA Pro Compressor is an all-analog externally powered or battery-operated compressor pedal designed for guitar and bass and hand-built around the top-class 4320 THAT Analog Engine®. The amount of control it offers is staggering and probably never before seen in a compression pedal, especially of this size. We didn’t leave out anything that helps to bring out a truly clean, accurate, and transparent compression. At the heart of processing, a true RMS-level detector measures the input signal and applies accurate feed-forward compression through a transparent sounding, high-performance Blackmer® VCA.

 

Key features

True analog bypass

Blackmer® VCA analog compressor

Optional DITOS board for transformer-coupled balanced output (10KΩ impedance)

True RMS-level detector

Ratio 1:1 – inf:1 (limiter)

Threshold -40dBu to +10dBu

Make-up Gain -6dB to +20dB

X-EQ with selectable frequency pivot 330Hz for bass or 1KHz for guitar

Soft/Hard compression knee

Manual timing: attack 0.12 to 12 ms/dB of gain reduction, release 1.2 to 120 ms/dB of gain reduction

Fast/Slower dynamic auto attack and release timing with hold for peaks over the threshold

Normal/Low/Deep side-chain filter

Dry/Wet mix

Tape Saturation on the dry line with Level compensation and Low/High-frequency cut filters (jumper selectable)

8-LEDs gain reduction meter

Hi-quality FET audio ICs, low tolerance parts, Panasonic & Kemet audio capacitors

Genuine Hammond black-powdered aluminum enclosure

Runs on standard 9V internal battery or 9-18 V DC external power supply (not included), center negative, 12mm long barrel plug

 

 

Kind regards

 

Greg

 

 

 

PXL_20211223_125026596.NIGHT.jpg

PXL_20211223_125055214.NIGHT.jpg

PXL_20211223_125216071.NIGHT.jpg

Edited by OriginalGBass
Sold
  • Like 2
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...