Jump to content
Why become a member? ×

51 precision bass pickguard -> help!


funkyjazz
 Share

Recommended Posts

Hi all,
I am in the process of restoring a bass and I am ideally looking for a vectorial representation of the pickguard of the 51 precision bass to be able to order one. Has anyone got it?
Can anyone comment also on how thick would it have to be to be faithful to the original?
I am only interested in the 51-54 (the original model without body contour).

The bass will be butterscotch and the pickguard black matte. How should the finish/material be?

Can anyone help me?

7B104693-B745-4FFF-9591-5A306BA590C6.jpeg

Link to comment
Share on other sites

Here are some links to 51-54 pickguard templates (3 variants):

 

https://www.greasygroove.com/mwdownloads/download/link/id/86/

https://www.greasygroove.com/mwdownloads/download/link/id/85/

https://www.greasygroove.com/mwdownloads/download/link/id/84/

 

According to http://www.guitarhq.com/fender.html the original material was 0.06" thick (1.5mm). Here's the extract:

 

Pickguard Material


Black pickguards: black pickguards were used from 1950 to mid-1954 on the Telecaster, Esquire and Precision bass. This material consisted of a fiberous bakelite, and was about .060 (inches) thick. The fiberous material was added to the bakelite to add strength (bakelite is too brittle and would crack at that thickness without it). Finally the black pickguards were clear-coated with clear nitrocellulose lacquer (top side only) to give them depth and shine.


White pickguards (single layer): starting in mid-1954 on the Telecaster/Esquire and Precision bass, and from the start on Strats in 1954. Fender used a single layer white pickguard material made from ABS or vinyl about .060 (inches) thick. This relatively new material for the time was cheap, easy to work with, and somewhat flexible. Note bakelite was never used for white Fender pickguards on any model (though many people refer to white pickguards as such; but it's not bakelite). Fender stopped using the white material in mid-1959 except on the Telecaster, Esquire and DuoSonic/MusicMaster. In this case the single layer thickness increased to .080 (inches), and was used till about 1965 (Esquires till about 1967, when all old stock was depleted).

 

 

  • Like 2
Link to comment
Share on other sites

3 minutes ago, ikay said:


... .060 (inches) thick. 


White pickguards (single layer): starting in mid-1954 on the Telecaster/Esquire and Precision bass, and from the start on Strats in 1954. Fender used a single layer white pickguard material made from ABS or vinyl about .060 (inches) thick. 

 

 

Thanks this shades some light on the thickness but 0.6 inches is a lot more than I had imaged!!!

I will post an image I took from a book which shows they are a few millimeters thick

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...