NORDSTRAND BIG BLADE PJ PICKUP SET - Now £120 posted - *SOLD* £130

[bagsieblue]

Nordstrand Big Blade PJ Pickup Set - £120 posted Mainland UK.

Actual photo to follow but these are in great condition.

Installed on a screw terminal so not been soldered.

 

J Pickup is the “clean and clear” wind.

 

This set of pickups is everything the title tells you it is: fat, slap-tastic fury from the P Blade, and an aggressive yet tamable tone from the Big J Blade. In the case of the Big J Blade, players may choose either a “warm and wooly” or “clean and clear” wind. In terms of what our builders can control upon the conception of their BJB, it is this choice in wind which serves as the player’s first and foremost front in customizing their BJB tone. The P Blade, however, is not quite so malleable. Its coalitions of magnetism and hardware belting through low and mid frequencies breeds the facilitation of doom for the sound spectrum, so we at Nordstrand suggest that if you’re looking for a raw, untamed, and aggressive sound accompanied by a disinhibiting yet friendly mediator, then the NPJ Blade set is right for you. 

Technical Details (J-Blade):

·        Big J-Blade Jazz-style Pickup.

·        Uniform magnetic field—no worries about pole spacing.

·        Choice in “warm and wooly” or “clean and clear” wind.

·        Loaded with two ceramic bar magnets.

·        Laser cut, vulcanized fiber bobbins wound with 42 Heavy Formvar wire.

·        Potted in a paraffin-beeswax mix to contain any unruly frequency that may attempt to desecrate your desired tone.

·        19mm maximum pitch—works for most basses.   

·        Blade radius designed for even output in most basses: (14”r: vintage round)

 

Technical Details (P-Blade):

·        Hum canceling split coil 4 string precision-type bass pickup.

·        Thick steel blade.

·        No worries about string spacing!

·        Loaded with two ceramic bar magnets.

·        Drop-in replacement P-bass pickup.

·        Available in black plastic covers

·        Laser cut vulcanized fiber bobbins.  

·        Blade radius designed for even output in most basses: (14”r: vintage round)

·        Potted in a paraffin-beeswax mix to contain any unruly frequency that may attempt to desecrate your desired tone.

 

Photo here - will remove from bass (solder less installation) once buyer is found.

 

Edited April 28, 2022 by bagsieblue