Natural P bass body and bridge. *SOLD**
£120
paisley

jezzaboy · June 10, 2021

NOW SOLD

Here is a 2 piece alder Northwest guitar P body. Finished in a natural finish for your John Deacon project! Fitted with a tort pickguard and a hi mass bridge both from NW guitars.

Please note, there was another bridge fitted and there is a couple of holes under the bridge so no good if you are looking to fit a BBOT bridge but as you can see, they are not seen with the type of bridge fitted here.

The body is in vgc just one small mark on the edge under the tone control knob which can`t be seen from the front and I can see one very small ding on the rear of the body near the bottom.

The weight is 2.5 kg or 5.5 lb`s. The neck pocket is the correct size for a Fender neck and I had a Nate Mendel Mexican neck fitted and it was a perfect fit. The neck pocket is listed below. I`m looking for £120 posted in the UK, if you want to collect from me in Paisley I will knock off the postage.

Material:

2-piece alder

Body thickness:

44mm (1 3/4")

Neck pocket width:

62mm (2 7/16")

Neck pocket depth:

17mm (43/74")

Control cavity depth:

38.5mm (1 33/64")

Pickup cavity depth:

17mm (43/64")