Jump to content
Why become a member? ×

Cost effective options for protecting rig


zbd1960
 Share

Recommended Posts

I've acquired my first hefty rig, taking advantage of the heavy discount Anderton's are offering on TC gear... So, I now have a TC RH750 and a K-410 cab... If I move these around, especially the cab, it's going to get bashed without some protection... This is not something I've previously looked into. I suspect that the head can go into some sort of padded bag - flight cases seem to have heft price tags. It gets very pricey for the cab. Anyone any suggestions for either flight case options or alternatives that provide a mix of protection with mobility? Probably asking for the impossible, but thought I'd ask.

 

89914570-16DF-4D55-8D4A-A1496F42F37D.jpeg

Link to comment
Share on other sites

For cabs, a roqsolid will protect from bumps and rain, and have flaps for the handles: https://www.roqsolid.co.uk/wp/amp-and-cab-covers-roqsolid-protection/

For heads, something like a mixer bag: https://www.gear4music.com/PA-DJ-and-Lighting/Gator-G-MIXERBAG-1212-Padded-Mixer-And-Equipment-Bag/2AAK

or a hard case with foam: https://www.gear4music.com/Recording-and-Computers/Heavy-Duty-Case-with-Pick-Foam-by-Gear4music-388-x-268-x-156mm/1ZC0 (find the correct size for your particular head, of course).

  • Like 4
Link to comment
Share on other sites

Some great ideas in the post above!  The Peli type cases are excellent for smaller/medium-sized items such as amps.  If you can mount the head in some kind of rack case, I'd recommend it and if not, be careful to ensure that it can't be pulled/knocked off the cab at rehearsals/gigs.  I've seen this happen quite a bit and more so with contemporary very lightweight heads.  For the cab, a lot depends on transport/lifting capacity.  I'd always use a flight case if possible/feasible (and you can often pick them up cheaply on Basschat, though additional foam/padding may be required).  They're highly protective, of course, and can provide a useful riser depending on stage size.  That said, they're heavy for load ins/load outs) and need storing when not in use.  A roqsolid should do a good job in terms of day-to-day protection and they're reasonably priced.  Oh, and a lovely new rig that you have there - very handsome   

Edited by three
  • Like 1
Link to comment
Share on other sites

Def Roqsolid for the cab, as well as protection from the weather you can have a section in it which you can insert a piece of board to protect the speaker grill. 

For the head, well I have a Wenger pilots case for my Ashdown RM500. It has plenty of separate sections for leads etc, and is very sturdy.

For touring I also have a Boschma case which I lined with foam, very hard wearing and as @three says, cases like these are very useful for putting a cab on to elevate and reduce storage space on smaller stages.

Edited by Lozz196
  • Like 1
Link to comment
Share on other sites

The regular Roqsolid covers I had were ok for keeping dust and light rain off, wouldn't want to rely of them for protection against knocks and bumps though. Thought they were quite expensive for what they were and looking at the website the price ramps up if you want basic padding. Have a look at Hotcovers or a smaller independent supplier, I got a custom cab cover made locally for ~£25 for a 1x10 cab and it is head and shoulders above my old Roqsolid ones. was a company called Bacsew. 

 

A laptop bag or mixer bag will do for the head, just find one with compatible internal dimensions. I like the Gator ones as they're cheap and match my gigbags! Bassdirect lists the RH750 as being suitable for their medium bag:

https://www.bassdirect.co.uk/bass_guitar_specialists/Gig_Skinz_Gig_Bags.html

  • Like 1
Link to comment
Share on other sites

The only reason I don't have Roqsolid cases for my current speakers is that they came with their own cases. Roqsolid is the way forward for the cab. Head in a backpack maybe? Used to keep mine in the laptop compartment of a Jeep backpack. 

  • Like 1
Link to comment
Share on other sites

I have both Roqsolids & Hotcovers. Both are well made. Hotcovers offer more protection against knocks in that they are well padded. The basic Roqsolid is fairly thin in comparision but they do offer an extra padded option for a little more money. 

I've always been fussy about protecting equipment and not skimped on getting something that does the job well. 

Even my bits & pieces travel in one of these:1_2c54bafd-a29c-47d7-9021-614d59c86354_2400x.JPG?v=1566043172

 

Edited by grandad
  • Like 1
Link to comment
Share on other sites

On 13/05/2021 at 19:10, lemmywinks said:

The regular Roqsolid covers I had were ok for keeping dust and light rain off, wouldn't want to rely of them for protection against knocks and bumps though. Thought they were quite expensive for what they were and looking at the website the price ramps up if you want basic padding. Have a look at Hotcovers or a smaller independent supplier, I got a custom cab cover made locally for ~£25 for a 1x10 cab and it is head and shoulders above my old Roqsolid ones. was a company called Bacsew. 

 

A laptop bag or mixer bag will do for the head, just find one with compatible internal dimensions. I like the Gator ones as they're cheap and match my gigbags! Bassdirect lists the RH750 as being suitable for their medium bag:

https://www.bassdirect.co.uk/bass_guitar_specialists/Gig_Skinz_Gig_Bags.html

Currently out of stock, but good to know.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...