[SOLD] PA bits: XLR, Speakon plugs; DIs; mic spares £35 Spalding, Lincs

[moley6knipe]

[ALL SOLD]

* Clear out of stuff that’s been knocking around my garage for years. Lots of stuff: search for Tag MoleSaleMay21
* Have tried to price these as “postage plus a few quid”. Happy to listen to offers for some / all of it!
* All prices include UK ONLY postage (Royal Mail standard 2nd class i.e. proof of postage, no signature/tracking, covered to £20).
* Payment by PayPal (buyer protection at your additional cost) or BACS.

Trade ins of interest:
* Sandberg gig bag
* Lava Tightrope pedalboard patch cable (at least 1m, any colour)

[SOLD] Speakon plugs - Neutrik NL4FC 4 pole twist - £5
Used - 7 plugs. 4 pole, the original twist lock plugs. Two of the plugs only have two terminal grub screws present. The twist lock mechanisms work fine. Will accept 1.5mm or 2.5mm cable.

[SOLD] Jack plugs - Neutrik NP2C mono ¼” - £6
Used - 11 plugs. Mono / unbalanced ¼”. 10 nickel (five of them with screen-printed RS part number), 1 black. All previously soldered at least once.

[SOLD] XLR plugs - Neutrik right angle male and female - £6
Used - 12 right angle male, 4 right angle female. All previously soldered at least once. All shell screws present. All have RS logo screen-printed, and some have sharpied text written on - they’ll clean up fine with a light scouring pad and white spirit.

[SOLD Shure SM58 (broken) - £5
Broken / Non-functional so sold for spares. Internal wiring looks visually ok so suspect the capsule is fried. Cosmetically fine.

[SOLD] Sennheiser 935 radio mic basket top - £5
Fits 2000 Series, G4 SKM, and G3 SKM. Basket top ONLY. Bought the wrong one! Unused.

[SOLD] DI - dual channel, passive, home-made - £4
I haven’t tested this to see if it actually works. Not made by me, inherited with a PA we bought years ago - looks like a kit build, well done and good components. Passive. Unbalanced Jack in, XLR out. I think the jack outs are just paralleled off the inputs, but they’re also wired to the ground lift switch (I’m not an expert!). Ground lift per channel. Phase switch per channel. 120mm wide x 100mm deep x 50mm tall (inc. height of switches).

[SOLD] DI - XLR in, dual channel, passive, home-made - £4
I haven’t tested this to see if it actually works. I think it’s a DI box, but for XLR inputs?! Big transformers. XLR in. XLR out with parallel unbalanced jack out. Ground lift per channel. Phase switch per channel. 115mm wide x 88mm deep x 70mm tall (inc. height of switches).

Edited May 11, 2021 by moley6knipe
SOLD!

[derreybass]

Pm sent

[binky_bass]

Pm'd re speakons and mic. 👍

Edited May 10, 2021 by binky_bass

[moley6knipe]

ALL SOLD